Roberts Radio R9968 manual Setting the local time, Setting summer time

Page 9

Setting the local time

1.After setting the time zone the bottom screen will flash the default

time setting, 12:00 and the Home icon . If you want to change the local time later, press and hold the Time Set button until the time flashes in the bottom display.

2.Press the Hour button to change the hour.

3.Press the Min. button to change the minutes.

12

34

4. Press the 12/24 button to switch between 12 and 24 hour clock formats. When the clock is set to 12 hour display an AM or PM indicator will be displayed. Make sure that the correct 12 hour cycle is selected.

5. Press the Time Set button to confirm the correct time.

5

6. The bottom display will stop flashing.

Setting summer time

1.Press and hold the Time Set button until the time flashes in the bottom display.

2.Press the H/W Summer button to put the clock forward by one hour. The Summer time icon will appear in the display.

3.Press the H/W Summer button again to remove the Summer Time icon and return the time to its original setting.

4.Press the Time Set button to confirm the change.

5.The bottom display will stop flashing.

12

34

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

9

Image 9
Contents R9968 Contents Overview Controls Front Controls Right side Left side Bottom Controls TopControls Back Batteries Disabling the buttons Switching on and setting the time zoneSetting summer time Setting the local timeShort wave radio reception Switching between local time and GMTListening to the radio Setting the alarm time Setting the alarm to buzzer 911 Setting the alarm to radioSnooze control Checking the alarm timeBacklight Sleep timerReset HeadphonesStereo/Mono reception headphone use only Power Requirements Circuit Features SpecificationsGuarantee Roberts Radio Technical Services