Grundig UMS 4100 manual Connecting headphones, Connecting the power cord

CONNECTION AND PREPARATION_______________________________________

		Connecting headphones
	A U X
U B S		1 Insert the headphone plug (ø 3.5 mm) into the »0« socket on the front of
	O N / O F F
D S C
		the stereo system.
F		– The loudspeakers of the stereo system are switched off.
		Connecting the power cord
		Note:
		Check that the mains voltage on the type plate (on the back of the device)
SPEAKER		corresponds to your local mains supply.
R		The only way to disconnect the device from the mains supply is to pull out the
L	AC ~	plug.
		1 Plug the power cord supplied into the »~AC« socket on the device.
		2 Insert the power plug into the mains socket.

Inserting the batteries in the remote control

1Open the battery compartment by pushing down the lid of the battery com- partment.

2When inserting the batteries (mignon type, for example AA, R 6, UM3), obser- ve the polarity marked on the base of the battery compartment.

Note:

If the device no longer reacts properly to remote control commands, the bat- teries may be flat. Always remove flat batteries. No liability is accepted for damage resulting from leaking batteries.

Environmental note:

Batteries, including those which are heavy metal-free, may not be disposed of with household waste. Please dispose of used batteries in an environmen- tally sound manner. Find out about the legal regulations which apply in your area.

ENGLISH

13