Sharp IM-DR400E To add characters, Stamping titles from another MiniDisc, Before stamping

IM-DR400E

Titling a MiniDisc (continued)

Advanced Features -Titling a MiniDisc-

32

!To add characters

1 Put the unit in the character input mode. (Perform steps 1 - 5 on page 30.)

2 Press the VOL + or VOL - button to move the

cursor to the character before which you want to add a new character.

3 Select the character to add. (Perform steps 6 - 8 on page 30.)

4 Press and hold down the MENU/ENTER but- ton for 2 seconds or more.

""TOC" will be displayed. To write the updated con- tents to the MiniDisc, press the :OFF/HOLD but- ton.

"You cannot remove the MiniDisc whilst "TOC" is displayed. "TOC" will not disappear until the re- corded contents have been updated.

!Stamping titles from another MiniDisc

Before stamping

When there are 2 MiniDiscs on which the same tracks are recorded, you can transfer the character information (disc and track names) of the master MiniDisc to another MiniDisc (for stamping).

1. What is a master MiniDisc?

A recordable MiniDisc that contains tracks and charac- ter information. (You cannot transfer the information from a playback-only MiniDisc.)

2. What is a MiniDisc for stamping?

A MiniDisc that contains the same tracks in the same or- der as the master MiniDisc. (Make sure that the total number of tracks of the master MiniDisc and the one for stamping are the same.)

IM-DR400E TINSE0562AWZZ

03/7/21 IM-DR400E_5.fm