Sharp IM-DR400E About Atrac, About the recording mode, LP4, Indication Recording mode

Page 23

Notes:

"In monaural recording, the sound on the right and left channels is mixed even if the input source is in stereo. Although you can hear the stereo sound from the ear- phones, the recorded sound is monaural.

"Tracks recorded in 2 times long recording and 4 times long recording modes cannot be played with the unit that does not support these modes. On such a unit, no sound is heard. (The operation may vary depending on the unit.)

"Tracks recorded in monaural cannot be played on a unit that does not support monaural playback.

!About ATRAC

The ATRAC (Adaptive TRansform Acoustic Coding) sys- tem compresses the sound data into 1/5 by cutting out the inaudible sound. Since the sound is selected based on psychoacoustics masking, the sound quality is not impaired. This unit is equipped with the ATRAC3 com- pressing system that can reduce the sound data to 1/10 or 1/20 of its original size. By employing this system, 2 times and 4 times long recordings are enabled in stereo mode.

!About the recording mode

You can select the recording mode from stereo recording, 2 times long recording, 4 times long recording, and mon- aural recording. Recordable time varies depending on the recording mode. If the tracks are recorded on an 80- minute MiniDisc, its recording time changes as follows:

Indication	Recording mode	Recording
		time

SP	Stereo	MAX. 80 min.
LP2	2 times long (MDLP	MAX. 160 min.
	stereo)
LP4	4 times long (MDLP	MAX. 320 min.
	stereo)
MONO	Monaural	MAX. 160 min.

!Caution for 4 times long recording

(LP4)

Special compression methods are used to achieve 4 times long recording. This may cause some noise to be recorded occasionally. When the highest quality is required, stereo or LP2 recording is recommended.

IM-DR400E

Useful Features -Advanced Recording-

23

5

6

5

4

3

2

1

IM-DR400E TINSE0562AWZZ

03/7/21 IM-DR400E_4.fm

Image 23

Contents IM-DR400E Special Notes Special NotesImportant Introduction Pole plug earphone optimizes Mobile 1-bit digital amplifier FeaturesFeatures Portable MD player with Mobile 1-bit Digital amplifierContents CD-ROM x AccessoriesAccessories Earphones xMain unit Names of Controls and IndicatorsImportant Introduction -Names of Controls and Indicators Reference TOC Indicator Track Number IndicatorDisplay panel Storing the unit PrecautionsPrecautions Avoid using or leaving the unit in the following placesDo not use a nickel-cadmium battery Power Source -Using with the AC Adaptor/Alkaline BatteryClose the battery cover Close the compartment door Inserting a MiniDiscMiniDisc Connections IM-DR400EConnectionsCheck before connecting Preparation -Hold Function To cancel the hold modeIM-DR400EHold Function Before Recording Helpful tip when attaching a labelBefore Recording About the TOCBefore recording RecordingBasic Operation -Recording To stop recording Press the MENU/ENTER buttonTo interrupt recording To interrupt playback To turn off the powerPlayback PlaybackBasic Operation -Playback Volume controlBass control To customise low and high levelsTo locate the beginning of a track Useful Features -Advanced PlaybackAdvanced Playback To locate the desired portionRandom Random play or repeat playStart recording Useful Features -Advanced RecordingAdvanced Recording Long-play recordingLP4 About the recording modeIndication Recording mode About AtracTo interrupt recording Lect REC ModePlayback sound-actuated recording 12Begin playback on the stereo systemNumbering restriction To create your own track numbersRecording tracks as a single track Useful -Advanced RecordingAbout track numbers About sampling rate converterUseful Features -Changing Default Settings Changing Default SettingsTo check the elapsed time and remain- ing time of the track IM-DR400EChecking DisplaysChecking the remaining amount of bat Tery level Useful Features -Checking DisplaysTo display the playing time of an indi- vidual track Enter button Titling a MiniDiscTitling a MiniDisc Creating disc and track namesTo enter a space Characters symbolsTo erase a character Stamping titles from another MiniDisc What is a master MiniDisc?What is a MiniDisc for stamping? To add charactersTER button Master MiniDisc operation 1 Insert a master MiniDiscTo erase all of the tracks at once Editing a Recorded MiniDiscEditing a Recorded MiniDisc To erase one track at a timeCombined, and press the button To divide a trackTo combine tracks Start playing the track to be divided into twoPlay the track to be moved, and press To move a trackAnother Listening through Another SystemResuming auto play Net MD -About Net MD What is a Net MD portable recorder?About Net MD Restrictions on audio data Restrictions on check-in and check-outMB or more System RequirementsNet MD -System Requirements Hard disk spaceClick BeatJam Setup Software InstallationInstallation of BeatJam Net MD -Software InstallationNet MD -Connecting to a PC IM-DR400EConnecting to a PCWindows Connecting to aChecking the USB driver Universal Serial Bus controllersNet MD -Transferring Data Transferring DataChecking out MiniDisc System Limitations MiniDisc System LimitationsError Messages Error MessagesTr. Protect Error Meaning Messages No SignalTroubleshooting TroubleshootingIf trouble occurs MaintenanceCleaning Troubleshooting/MaintenanceSpecifications SpecificationsOutput level Battery lifeInput sensitivity Sharp Corporation