Sharp IM-DR400E operation manual Checking out, Net MD -Transferring Data

IM-DR400E

Transferring Data

! Checking out	! Checking in
Check-out is to transfer tracks to OpenMG compatible	Check-in means to return the tracks from external
players. You can check out recorded tracks with BeatJam	devices to the PC. You can check-in tracks only to the
up to 3 times.	source PC.

Net MD -Transferring Data-

1 Connect this unit to the PC.

"PC" appears on the unit display and operations with the unit are disabled.

However, "PC" is not displayed whilst in the record- ing, recording pause or menu operation mode.

2 Transfer music files to the unit (check-out).

For details, refer to the manual of BeatJam.

Follow the instructions below to take out the MD after check-out:

1.Remove the USB connector from the MD portable re- corder.

2.Turn off the MD recorder.

3.Remove the MD.

1 Connect this unit to the PC.

"PC" appears on the unit display and operations with the unit are disabled.

However, "PC" is not displayed whilst in the record- ing, recording pause or menu operation mode.

2 Return a music file to your PC.

For details, refer to the manual of BeatJam.

Caution:

"If the USB connection or the power supply to the com- puter or the MD portable recorder is cut off during check-in or check-out operation, audio data may be lost.

"If a checked-out track is deleted in another computer, it cannot be checked in any more.

TOC writing on an MD:

"TOC writing will start when check-in or check-out is complete. Whilst writing, TOC indicator on the unit will flash. (Refer to page 15.)

44

IM-DR400E TINSE0562AWZZ

03/7/21 IM-DR400E_6.fm