Sharp DK-CL3P General control, Display brightness control Dimmer, To turn the power on, After use

General control

■ Display brightness control (DIMMER)

DK-CL3P

ENGLISH

MEMORY

■To turn the power on

Press the ON/STAND-BY button to turn the power on.

The first time power is supplied to the unit, the clock will be blinking on the display. Please set the time and date

(refer page 11).

After use:

Press and hold the ON/STAND-BY button to enter the power stand-by mode.

Press the SNOOZE/DIMMER button to adjust the brightness of LCD display.

Dimmer 1 (Display is dim)

Dimmer 2 (Display gets dimmer)

Dimmer off (Display is bright)

Notes:

●Setting dimmer to display in the brightest mode during battery operation will affect battery life.

●During battery operation in standby mode, the brightness of the display will automatically go to the lowest mode (dim OFF) after 5 seconds.

■Volume auto set in

If you turn off and on the main unit with the volume set to 17 or higher, the volume starts at 16.

■Volume control

MON

Press the VOLUME (+ or –) button to increase or decrease the volume. Volume indicator will be blinking when volume reaches maximum and minimum level.

Basic Operation

E-10