Sharp operation manual DK-CL3PSetting the time and date

DK-CL3PSetting the time and date

ENGLISH

Basic Operation

MEMORY

MEMORY

In this example, the clock is set for the 12-H (12 hour) display.

1In standby mode, press the CLOCK button for more than 2 seconds. The clock time display will blinking.

MON MON

Press the or button to select clock time display format and then press CLOCK button.

2	Press the	or	button to adjust the hour and
	then press the CLOCK button.
			MON
	Press the	or	button once to advance the time by
	1 hour. Hold it down to advance continuously.
	“AM” or “PM” indicator will interchange after each 12 hour
	cyclic in 12-H clock format.
3	Press the	or	button to adjust the minutes and
	then press the CLOCK button.

MON

Press the or button once to advance the time by 1 minute. Hold it down for about 2 seconds to change the time in 5-minutes interval.

4Press the or button to adjust the day and then press the CLOCK button.

MON THU

“:” will be blinking to indicate time and date setting is completed.

Note:

During battery operations in standby mode, press the SNOOZE/ DIMMER button to display the clock for about 5 seconds.

E-11