Sharp DK-CL3P operation manual Troubleshooting chart, Tuner, Symptom Possible cause

■Listening to the audio/video sounds from portable audio player, computer etc.

1Use the auxiliary cable to connect the portable audio player, computer etc. to the AUDIO IN jack.

When using video equipment, connect the audio output to this unit and the video output to a television.

2Press the ON/STAND-BY button to turn the power on.

3Press the FUNCTION button to select AUX function.

4Play the connected equipment.

Note:

To prevent noise interference, place the unit away from the television and do not make any auxilary playback while listening to the iPod or iPhone.

Troubleshooting chart

Many potential problems can be resolved by the owner without calling a service technician.

If something is wrong with this product, check the following before calling your authorized SHARP dealer or service center.

■ General

Symptom	Possible cause
● The clock is not set to the	● Did a power failure occur?
correct time.	Reset the clock. (Refer to
	page 11)
● When a button is	● Set the unit to the power
pressed, the unit does	stand-by mode and then turn
not respond.	it back on.
	● If the unit still malfunctions,
	reset it.
	(Refer to page 19)
● No sound is heard.	● Is the volume level set to “0”?

■Tuner

Symptom Possible cause

●The radio makes unusual ● Is the unit placed near the

noises continuously.	TV or computer?
	● Is the FM antenna placed
	properly? Move the antenna
	away from the AC/DC
	adaptor if it is located
	nearby.

DK-CL3P

ENGLISH

Advanced Features/Reference

E-18