Enhancing your system, Alarm operation

DK-CL3P

ENGLISH

Advanced Features

E-17

Alarm operation (continued)

Note:

If wake up source is set to iPod, and iPod is not present, the alarm source will change to default Buzzer.

■ Activate and deactivate the alarm
1	During standby mode, press ALARM button to
	deactivate current alarm times and wake up source.
2	Press ALARM button again to reactivate the last alarm
	function. When the alarm setting time is activated,
	alarm information will shown for 5 seconds and alarm
	icon ( ) will appear on display.
	SUN MON TUE WED THU FRI SAT
	S
	BB
3	When alarm has started, alarm icon ( ) will blinking on
	the display.

●During alarm is function, press ALARM RESET button to stop alarm and it will come again on the next day.

Sure Alarm:

●When power failure, the alarm will function if the backup batteries are installed.

Once alarm has started, pressing the SNOOZE/DIMMER button will stop alarm for 9 minutes.

During snooze, “” icon will light up and “” icon will blinking. Once the snooze time has expired, alarm will continue.

The snooze function can be operated during 1 hour alarm cycle.

The auxiliary cable is not included. Purchase a separate auxiliary cable as shown below.

Portable audio player

Computer

To the line output jack

Auxiliary cable (not supplied)