ENGLISH
Troubleshooting chart (continued)
References
■ iPod and iPhone
Symptom | Possible cause | |
|
| |
● No sound is produced. | ● The iPod or iPhone unit | |
No image appears on | software version is not update | |
the TV/monitor. | to the latest version. Please | |
| visit Apple’s homepage. | |
| ● The iPod or iPhone is not | |
| playing. | |
| ● The iPod or iPhone is not | |
| properly connected to the unit. | |
| ● Is the AC/DC adaptor of the | |
| unit plugged in? | |
| ● The video cable is not properly | |
| connected. | |
| ● The TV/monitor’s input | |
| selection is not properly set. | |
|
| |
● iPod or iPhone will not | ● The iPod or iPhone is not | |
charge. | making full contact with the | |
| connector. | |
| ● Is the AC/DC adaptor of the | |
| unit plugged in? | |
| ● Using iPod (3rd generation). | |
| ● The main unit is using | |
| batteries as power supply. | |
| ● The iPod or iPhone is not | |
| compatible. Refer page 12 for | |
| compatible models. | |
|
| |
● “This accessory is not | ● The iPhone battery is low. | |
made to work with | Please charge the iPhone. | |
iPhone” or similar | ● iPhone not properly docked. | |
appears on iPhone | ||
| ||
screen. |
| |
|
|
■Condensation
Sudden temperature changes, storage or operation in an extremely humid environment may cause condensation inside the cabinet or on the transmitter on the remote control.
Condensation can cause the unit to malfunction. If this happens, leave the power on until normal playback is possible (about 1 hour). Wipe off any condensation on the transmitter with a soft cloth before operating the unit.
■If problem occurs
When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is operated incorrectly, it may malfunction.
If such a problem occurs, do the following:
1Set the unit to the
2If the unit is not restored in the previous operation, unplug and plug in the unit, and then turn the power on.
Note:
If neither operation above restores the unit, remove the backup batteries.
■Clearing all the memory (reset)
During standby mode, press and hold SNOOZE button for 5 seconds. Display will become blank for awhile and main unit will reset.
Caution:
This operation will erase all data stored in memory including clock, alarm settings and tuner preset.
■Before transporting the unit
Remove the iPod or iPhone from the unit. Then, set the unit to the power standby mode. Carrying the unit with iPod or iPhone left docked might damage both systems.