Sunfire HRS-SAT4C user manual Optional Satellite Stand, Procedure

Page 11

Optional Satellite Stand

The HRS-SAT4 satellite loudspeaker has an optional stand that allows it to be installed neatly in your room.

The base of the stand can be fitted with four spikes, or four rubber-tipped spikes if you have hardwood floors etc.

2.Feed the speaker wires up through the base, until they can be gently pulled through the rectangular hole near the top of the column.

Wires

Tools required:

Allen wrench (supplied with stand)

Preliminary steps:

Wires

Run the speaker cables to each lo- cation, so these can be fitted to the

HRS-SAT4 loudspeaker during the assembly of the stand. See page 6 and 7 for placement options.

Procedure:

1.Fit the column into the base, and secure it with three screws supplied. Fit the four spikes or rub- ber-tipped spikes to the base and tighten with the supplied wrench.

Column

Base

Spikes

3.Connect the speaker wires to the loudspeaker rear terminals. Make sure the polarity is correct, and gently pull on the wires to make sure they make a secure connec- tion. Note that single and dual- banana plugs cannot be used with this stand.

Keyhole bracket

Binding posts

Threaded hole

4.Fit the keyhole bracket in the rear of the loudspeaker over the screw head that sticks out near the top of the column. Check that it is securely in the keyhole slot.

3 screws

User's Manual 11

Image 11
Contents High Resolution Series Satellite and Center Loudspeakers Contents Important Safety InstructionsCare Introduction FeaturesUnpacking Optional satellite stand OverviewTweeterWoofers Cabinet and baffleKickstand FeaturesMounting Brackets Anti-vibration pads Binding PostsCenter Loudspeaker Loudspeaker LocationsFront Left/Right Speakers 7.1 Configuration ConfigurationSubwoofer Location Using a subwooferWall-mounting the HRS-SAT4 InstallationTools required Preliminary stepsHRS-SAT4C Wall-mountingOptional Satellite Stand ProcedurePage Specifications Poor or no sound TroubleshootingService Assistance Limited WarrantyHigh Resolution Series Satellite and Center Loudspeakers

HRS-SAT4C, HRS-SAT4 specifications

The Sunfire HRS-SAT4 and HRS-SAT4C represent cutting-edge innovations in the realm of satellite communication technology. Designed to enhance the global connectivity landscape, these high-performance satellite terminals cater to a range of applications, from commercial telecommunications to governmental operations.

One of the standout features of the HRS-SAT4 and HRS-SAT4C is their advanced modulation and coding schemes, which ensure reliable data transmission even in challenging environments. These terminals utilize state-of-the-art encoding techniques to minimize data loss and maximize throughput, making them ideal for bandwidth-intensive applications. The integration of adaptive coding allows the system to optimize performance based on current conditions, helping to maintain a consistent connection.

The HRS-SAT4 series also boasts a scalable architecture that supports various operational needs. Users can easily configure the terminals to meet specific bandwidth requirements, allowing for easy adjustments as operational demands evolve. This flexibility ensures that both the HRS-SAT4 and HRS-SAT4C can handle diverse applications from video conferencing to critical data relay.

In terms of physical characteristics, both models are engineered for durability and portability. They feature ruggedized components designed to withstand harsh environmental conditions, ensuring reliability whether deployed in remote locations or urban centers. This robust construction is complemented by integrated weather-resistant housings that protect the electronics from moisture and dust.

Moreover, the HRS-SAT4C variant includes enhanced cryptographic security features, catering to users who require secure communication channels. This adds an essential layer of protection against potential eavesdropping or cyber threats, making it particularly attractive for government and defense applications.

Another notable advantage of the Sunfire HRS-SAT4 and HRS-SAT4C is their compatibility with multiple satellite constellations, allowing users to access a wide array of satellite services. This multi-network capability ensures resilience and redundancy, making these terminals valuable assets in mission-critical scenarios.

In summary, the Sunfire HRS-SAT4 and HRS-SAT4C satellite terminals are exemplars of innovation, offering superior performance, scalability, and security. With their advanced technologies and robust design, they are poised to meet the evolving needs of satellite communications in a dynamic global environment.