Packard Bell 100 manual Opening the Casing, Removing the Battery

Page 6

5

Opening the Casing

To open the player, perform these following steps:

1.Gently pry the bottom and the top cover apart. There is a flat cable keeping the mainboard and the hard disk together.

Fig. 1 Location of the flat cable

2.Disconnect the flat cable on either end, depending on the parts that need to be exchanged

Removing the Battery

To remove the internal battery, first open the casing (see Opening the Casing) and then perform the following steps:

1.Lift up the foil with product specifications on the backside; under the lower side corners are two screws.

2.Remove the two screws

3.Remove the cover, and lift the battery out, so that its connector is freely accessible (see Fig. 2).

Packard Bell Vibe 100 Disassembly Manual

Image 6
Contents Packard Bell Vibe Disassembly Manual Table of Contents Overview Disassembly InstructionsReassembly Instructions Technician NotesPower Supply Unit Hazardous VoltageAvoid Electrostatic Discharge Waarschuwing Removing the Battery Opening the CasingLocation of the battery connector Removing the Hard DiskRemoving the Mainboard/LCD assembly Flat cable connectorHDD connector Hold switch Vibe 100 Disassembly Manual