Inserting and Ejecting SmartMedia cards
Inserting SmartMedia cards
Insert the SmartMedia card into the slot as shown below.
Inserting and
Ejecting SmartMedia cards
contact area
1
REC |
|
STOP | INDEX/EQ |
|
1
2 Set the POWER/LOCK switch to ON. The display appears.
SmartMedia inserted fully into the slot
When you set the POWER/LOCK switch to the ON position, “PLEASE WAIT” flashes on the display for several seconds.
MENU | ERASE |
|
2
POWER | |
/LOCK | |
OFF | ON |
|
SmartMedia not inserted fully into the slot
When you set the POWER/LOCK switch to the ON position, “INSERT CARD” flashes on the display for several seconds. Pressing any button with no SmartMedia card inserted causes “INSERT CARD” to appear again.
Push the SmartMedia card fully into position.
Bottom side of SmartMedia projecting from the slot
...............................................................................................................................................
Notes
• If an unformatted SmartMedia card is inserted, “FORMAT YES?” will display automatically. Format the SmartMedia card (→ P.55).
• Never use any SmartMedia card other than one that has been formatted on this unit or on a CAMEDIA series Olympus digital camera (→ P.55).
12