Inserting Batteries
Inserting Batteries
1
POWER | |
/LOCK | |
OFF | ON |
| |
2
3
4
1 Set the POWER/LOCK switch to OFF.
2 Lightly press down on the arrow and slide the battery cover open.
3 Insert two AAA alkaline batteries, observing the correct polarity.
4 Close the battery cover completely.
Replacing batteries
The battery indicator on the display changes as the batteries lose power.
→ | → | → |
“BATTERY
LOW”
When 
appears on the display, replace the batteries as soon as possible.
When the batteries are too weak, the recorder shuts down and “BATTERY LOW” appears on the display. AAA alkaline batteries are recommended.
10
...............................................................................................................................................
Notes
•Be sure to set the POWER/LOCK switch to OFF position when replacing batteries. Unloading the batteries while the recorder is recording, erasing or otherwise accessing an audio or a music file may corrupt the file.
•Be sure to replace both batteries at the same time.
•Never mix old and new batteries, or batteries of different types and/or brands.
•If it takes longer than 3 minutes to replace dead batteries, the internal rechargeable backup battery will
be exhausted, so you may have to reset the time when you load fresh batteries (→
• Remove the batteries if you are not going to use the recorder for an extended period of time.