Olympus DS2000 SmartMedia not inserted fully into the slot, Set the POWER/LOCK switch to OFF

SmartMedia inserted fully into the	Ejecting SmartMedia cards
slot

When you set the POWER/LOCK switch to the ON position, “PLEASE WAIT” flashes on the display.

SmartMedia not inserted fully into the slot

Bottom side of SmartMedia projecting from the slot

When you set the POWER/LOCK switch to the ON position, “INSERT CARD” flashes on the display for 2 seconds. Pressing any button with no SmartMedia card inserted causes “INSERT CARD” to appear again.

Push the SmartMedia card fully into position.

1

	POWER			Inserting
	/LOCK		2
	OFF	ON
1 The display disappears.				Ejectingand
	Set the POWER/LOCK switch to OFF.
	Raise the SmartMedia ejection switch.			SmartMedia
2 Pull the SmartMedia card out with your fingers.
	.....................................................................
The SmartMedia ejection switch won’t work				cards
if the POWER/LOCK switch is set to ON.
Attention
•	SmartMedia cards are precision devices. Never
	force the cards when inserting them, or subject
	them to sharp blows.
•	Avoid handling and storing SmartMedia cards
	in a hot, damp environment.
•	Do not touch the contact area (gold electrodes)
	of the SmartMedia card with bare hands.
	If a SmartMedia card gets dirty, wipe it with a soft,
	dry cloth.
• SmartMedia cards may be vulnerable to
	electrostatic data corruption. When carrying a
	SmartMedia card, put it in its case.
	Remember to back up data from SmartMedia cards
	to a PC or other storage medium from time to time
	(☞ P.39).
• Corrupted, lost, or erased data cannot be				13
	restored.