Olympus DS2000 manual Batteries, AC Adapter, Case, Noise, heat, smoke, or a burning odor

Page 3

Batteries

Warning

Batteries should never be exposed to flame, heated, short-circuited or disassembled.

Do not attempt to recharge alkaline, lithium or any other non-rechargeable batteries.

Never use any battery with a torn or cracked outer cover.

Keep batteries out of the reach of children.

If you notice anything unusual when using this product such as abnormal noise, heat, smoke, or a burning odor:

1remove the batteries immediately while being careful not to burn yourself, and;

2call your dealer or local Olympus representative for servicing.

AC Adapter

Warning

Do not attempt to disassemble, repair or modify the AC adapter in any way.

Keep foreign objects including water, metal, or flammable substances from getting inside the product.

Do not moisten the AC adapter or touch it with a wet hand.

Do not use the AC adapter in the vicinity of flammable gas (including gasoline, benzine and lacquer thinner).

In case

... the internal parts of the AC adapter are exposed because it has been dropped or otherwise damaged:

... the AC adapter is dropped in water, or if water, metal flammable substances or other foreign objects get inside it:

... you notice anything unusual when using the AC adapter such as abnormal

noise, heat, smoke, or a burning odor:

1do not touch any of the exposed parts;

2immediately disconnect the power supply

plug from the power outlet, and;

3call your dealer or local Olympus representative for servicing. Continued use of the AC adapter under these circumstances could result in electric shock, fire or injury.

3

Image 3
Contents DS-2000 For Safe Correct Usage General PrecautionsNoise, heat, smoke, or a burning odor BatteriesAC Adapter CaseMain Features Table of Contents Audio Recording Format What is SmartMedia?Memory Size SP Mode LP Mode SmartMediaWrite-protect SmartMedia Parts Identification of PartsDisplay LCD Panel Inserting Batteries Inserting BatteriesUsing the AC Adapter Replacing Batteries/Using the AC AdapterReplacing Batteries Insert the SmartMedia Set the POWER/LOCK switch toInserting and Ejecting SmartMedia cards Inserting SmartMedia cardsSet the POWER/LOCK switch to OFF If the POWER/LOCK switch is set to onSmartMedia not inserted fully into the slot Press the Stop button to end Setting Time/DateTime/Date Screen Repeat steps 1 and 2 to set the time and dateSetting Time/Date Press the REC button to start recording RecordingNew Recording Press the Folder button to choose a folderPause Pause RecordingTo instantly review a recording Quick review Listening While Audio Is Recorded Recording MonitorOverwrite Recording Recording ACurrent folder Insert RecordingRecording/Microphone Sensitivity Microphone SensitivityPause Insert Recording Resume Insert RecordingMenu opens P.42 Recording mode setup process beginsRecording Modes Press the Menu buttonPlaying ARecorded time Date SelectedFile Playback Functions Canceling PlaybackTo skip backward Canceling Fast PlaybackCanceling a Cue Canceling the ReviewErasing Erasing One File at a TimeErasing Erase All Files from a Folder Want to erase all filesPress the Erase button for 3 seconds or longer Using Low 2 HighVoice Actuator Cleared Index MarksClearing an Index Mark Choose the index mark to beLocked Locking FilesPress the FF/+ or REW/- button to choose between on and OFF Locking FilesMenu Complete the setup screenPress the Play button to Press the Stop button to closeBFile to be Alarm Playback FunctionPress the Play button to complete Setup screen Alarm Playback FunctionPress the FF/+ or REW/- button to set 10 10 minute Minute indicator flashesAlarm Playback setting is clearedDisplay System sound setup process beginsSystem Sounds Until Beep flashes onAfter transfer Moving Files AcrossFolders Press the Play button to accept the destination folderChoose the folder you want to Assigning Folder NamesUntil Folder Name flashes on 2 the displayPress the FF/+ or REW/- button to choose characters Formatting SmartMedia Until Format flashes onPress the FF/+ or REW/- button to choose YES? USB cable To PC’s USB connectorTransferring Data to a PC TipHold/Reset HoldResetSetting the Hold switch to the Hold position Remember to reset the Hold switch when using the recorderTraining your PC for Voice Recognition Earphone jackPC for Voice Recognition Menu List Menu ListMessage Meaning Explanation Alarm Message ListAction TroubleshootingSymptom Probable causeSpecifications Accessories optional Technical Assistance And Support Technical Assistance And SupportDeclaration of Conformity Canadian RFI