Olympus DS2000 manual HoldReset, Setting the Hold switch to the Hold position, Hold/Reset

Page 40

HoldReset

Hold/Reset

HOLD

 

REC

 

 

 

 

INDEX

 

STOP

 

 

 

 

NU

ER

ASE

 

ME

 

 

 

 

 

 

 

 

Setting the HOLD switch to the HOLD position.

If you set the recorder to HOLD status by sliding the HOLD switch in the direction of the arrow, the current conditions will be preserved, and all buttons and switches except the HOLD switch will be disabled. This feature is useful when the recorder has to be carried in a bag or pocket.

Remember to reset the HOLD switch when using the recorder.

Notes

• If you set the recorder to hold during Stop mode, the display goes dark. If you press any button, the time will flash for about 2 seconds, but the function of the button is disabled.

• The alarm will sound at the scheduled time even if the recorder is set to hold. The recorder begins to play the file associated with the alarm when you press any button.

• If you are recording when you switch the recorder to HOLD, recording will continue until the recorder memory runs out.

If the display or the recorder acts strangely, lightly press the reset button in the battery compartment with the tip of a ballpoint pen or a similar object.

Notes

Do not use a sharp object such as a needle.

The time/date setup process launches automatically when you press the reset button. Set the time and date again (P.14).

Audio data is not erased when the recorder is reset.

40

Image 40
Contents DS-2000 General Precautions For Safe Correct UsageBatteries AC AdapterCase Noise, heat, smoke, or a burning odorMain Features Table of Contents What is SmartMedia? Memory Size SP Mode LP ModeSmartMedia Audio Recording FormatWrite-protect SmartMedia Identification of Parts PartsDisplay LCD Panel Inserting Batteries Inserting BatteriesReplacing Batteries/Using the AC Adapter Using the AC AdapterReplacing Batteries Set the POWER/LOCK switch to Inserting and Ejecting SmartMedia cardsInserting SmartMedia cards Insert the SmartMediaIf the POWER/LOCK switch is set to on Set the POWER/LOCK switch to OFFSmartMedia not inserted fully into the slot Setting Time/Date Time/Date ScreenRepeat steps 1 and 2 to set the time and date Press the Stop button to endSetting Time/Date Recording New RecordingPress the Folder button to choose a folder Press the REC button to start recordingPause Recording To instantly review a recording Quick reviewListening While Audio Is Recorded Recording Monitor PauseOverwrite Recording Recording Insert Recording ACurrent folderMicrophone Sensitivity Pause Insert RecordingResume Insert Recording Recording/Microphone SensitivityRecording mode setup process begins Recording ModesPress the Menu button Menu opens P.42ARecorded time Date Selected PlayingFile Canceling Playback Playback FunctionsCanceling Fast Playback Canceling a CueCanceling the Review To skip backwardErasing One File at a Time ErasingErasing Want to erase all files Erase All Files from a FolderPress the Erase button for 3 seconds or longer Low 2 High UsingVoice Actuator Index Marks Clearing an Index MarkChoose the index mark to be ClearedLocking Files Press the FF/+ or REW/- button to choose between on and OFFLocking Files LockedComplete the setup screen Press the Play button toPress the Stop button to close MenuAlarm Playback Function Press the Play button to complete Setup screenAlarm Playback Function BFile to beMinute indicator flashes AlarmPlayback setting is cleared Press the FF/+ or REW/- button to set 10 10 minuteSystem sound setup process begins System SoundsUntil Beep flashes on DisplayMoving Files Across FoldersPress the Play button to accept the destination folder After transferAssigning Folder Names Until Folder Name flashes on2 the display Choose the folder you want toPress the FF/+ or REW/- button to choose characters Until Format flashes on Formatting SmartMediaPress the FF/+ or REW/- button to choose YES? USB connector Transferring Data to a PCTip USB cable To PC’sHoldReset Setting the Hold switch to the Hold positionRemember to reset the Hold switch when using the recorder Hold/ResetEarphone jack Training your PC for Voice RecognitionPC for Voice Recognition Menu List Menu ListAlarm Message List Message Meaning ExplanationTroubleshooting SymptomProbable cause ActionSpecifications Accessories optional Technical Assistance And Support Technical Assistance And SupportCanadian RFI Declaration of Conformity