Olympus DS2000 manual Transferring Data to a PC, Tip, USB cable To PC’s, USB connector

Page 39

Notes

•When a SmartMedia card is formatted, all the stored data, including locked files, is erased.

•A SmartMedia card with a write-protect seal attached to it cannot be formatted (☞ P.7).

•If an unformatted SmartMedia card is inserted, “FORMAT YES?” will display automatically.

Never use any SmartMedia card other than one that has been formatted with this unit or with a CAMEDIA series Olympus digital camera.

Other SmartMedia cards may not perform as expected.

Transferring Data to a PC

This recorder is equipped with a USB terminal connector to enable recorded voice data to be transferred to a PC. For more details on how to transfer data, refer to the instruction manual for the software.

PC

	USB cable
	To PC’s	USB terminal
	USB connector	USB terminal
	USB connector

Stop the recorder before plugging in the USB cable. Do not use the AC adapter when connecting the recorder to the USB port. The USB port delivers the required power to the recorder.

Tip

When the SmartMedia card is ejected, data can be transferred from the SmartMedia card to a PC via a number of ways. See Page 46 for optional accessories to download SmartMedia through your PCMCIA, USB, or Floppy Disk drives.

Formatting SmartMedia Transferring Data

to a PC

39

Image 39

Contents DS-2000 For Safe Correct Usage General PrecautionsNoise, heat, smoke, or a burning odor BatteriesAC Adapter CaseMain Features Table of Contents Audio Recording Format What is SmartMedia?Memory Size SP Mode LP Mode SmartMediaWrite-protect SmartMedia Parts Identification of PartsDisplay LCD Panel Inserting Batteries Inserting BatteriesUsing the AC Adapter Replacing Batteries/Using the AC AdapterReplacing Batteries Insert the SmartMedia Set the POWER/LOCK switch toInserting and Ejecting SmartMedia cards Inserting SmartMedia cardsSet the POWER/LOCK switch to OFF If the POWER/LOCK switch is set to onSmartMedia not inserted fully into the slot Press the Stop button to end Setting Time/DateTime/Date Screen Repeat steps 1 and 2 to set the time and dateSetting Time/Date Press the REC button to start recording RecordingNew Recording Press the Folder button to choose a folderPause Pause RecordingTo instantly review a recording Quick review Listening While Audio Is Recorded Recording MonitorOverwrite Recording Recording ACurrent folder Insert RecordingRecording/Microphone Sensitivity Microphone SensitivityPause Insert Recording Resume Insert RecordingMenu opens P.42 Recording mode setup process beginsRecording Modes Press the Menu buttonPlaying ARecorded time Date SelectedFile Playback Functions Canceling PlaybackTo skip backward Canceling Fast PlaybackCanceling a Cue Canceling the ReviewErasing Erasing One File at a TimeErasing Erase All Files from a Folder Want to erase all filesPress the Erase button for 3 seconds or longer Using Low 2 HighVoice Actuator Cleared Index MarksClearing an Index Mark Choose the index mark to beLocked Locking FilesPress the FF/+ or REW/- button to choose between on and OFF Locking FilesMenu Complete the setup screenPress the Play button to Press the Stop button to closeBFile to be Alarm Playback FunctionPress the Play button to complete Setup screen Alarm Playback FunctionPress the FF/+ or REW/- button to set 10 10 minute Minute indicator flashesAlarm Playback setting is clearedDisplay System sound setup process beginsSystem Sounds Until Beep flashes onAfter transfer Moving Files AcrossFolders Press the Play button to accept the destination folderChoose the folder you want to Assigning Folder NamesUntil Folder Name flashes on 2 the displayPress the FF/+ or REW/- button to choose characters Formatting SmartMedia Until Format flashes onPress the FF/+ or REW/- button to choose YES? USB cable To PC’s USB connectorTransferring Data to a PC TipHold/Reset HoldResetSetting the Hold switch to the Hold position Remember to reset the Hold switch when using the recorderTraining your PC for Voice Recognition Earphone jackPC for Voice Recognition Menu List Menu ListMessage Meaning Explanation Alarm Message ListAction TroubleshootingSymptom Probable causeSpecifications Accessories optional Technical Assistance And Support Technical Assistance And SupportDeclaration of Conformity Canadian RFI