DS5 | User Guide |
Drive Assembly - DS5M
If your setup requires an internal drive, open the case and install a hard drive before turning the unit on.
2.5” HDD
1.Lift the top cover off the body. If it’s already locked in place, push it upwards with a thin and small item through the opening at the bottom.
3. Lift the frame out of the plastic casing.
4. Align the screw threads of the hard drive with the holes in the framing and place it in the frame.
2.Remove the screws which are holding the aluminium frame in place.
Page 10 / Chapter 2 - Hardware Installation