DS5 | User Guide |
Misc2 Category
In this category, you can manage your files using the copy and erase functions and set the playback mode for automated playback.
Use the arrow keys on your remote control for navigation and press the ENTER button to configure the settings.
[File Copy] Use this to easily and quickly copy new files to or from your local drive. This will copy all files found in the root directory of either your local drive or the remote location but does not include any
[File Erase] This function can be used to erase all data on the local drive or one of the attached USB drives.
[Setup Value] Use this function to reset all settings to their factory default value.
[Play Mode] Select your preferred play mode from 4 different types:
Standard - Default setting for standard media player with user input via remote control. Repeat - Automatically plays and repeats all files stored in the root directory at boot up. Manual - Plays title file at boot up as well as after user input via numeric buttons
[Remote Command Path] Define the location that the DS5 should monitor for remote commands. Set it to HDD if you intend to use the Configuration Tool or TFTP.
[Auto ON/OFF] Turning this function ON allows you to set a time for the unit to automatically turn ON and also a time for it to turn OFF again.
Page 21 / Chapter 3 - Software Configuration