DS5 | User Guide |
Misc1 Category
In this category, you can set the time using an NTP server via the internet. Once the time is set, you can configure the playlist, download function and schedule for these functions.
Use the arrow keys on your remote control for navigation and the ENTER button to configure the settings.
[Date Time] Displays current date and time. If the time or date is not correct, make sure you have selected the correct time zone, choose another NTP server from list and ensure that your internet connection is working. After changing the NTP server, reboot your device.
[Time Zone] Select the time zone of your country. If you do not know the time offset, refer to your PC clock. Double click on the time in the taskbar and go to Time Zone. Select your country from the list and you will see the corresponding time offset.
[NTP Server] Select one of the NTP servers from the list or enter the IP address manually to synchronise the time via the internet. Turn it OFF if you don’t need this function.
[Play List] To enable this function, turn it ON. Once it is enabled, you can set the path to your playlist and enter a time for the playback to start. If you set the time to 99:99, the playback will start immediately after the unit is turned on.
[Download List] To enable this function, select either Foreground or Background. Foreground will display the download progress, whereas Background will hide it. Once it is enabled, you can set the path to your download list on a remote server and enter a time for the download to start. To use this function, you need an internal drive or CF card, as well as a connection to the internet.
Note: If the NTP server is enabled, the time will be synchronised via the internet at boot up. Make sure the internet connection works, or otherwise the DS5 will reset its time and start from 09:00.
Page 20 / Chapter 3 - Software Configuration