REMOTE CONTROL
BATTERY INSTALLATION
1.Remove the Battery Compartment door by sliding it downward.
2.Install a CR2025 battery, paying attention to the polarity diagram in the battery compartment (positive side up).
3.Replace the Battery Compartment door.
BATTERY PRECAUTIONS
Follow these precautions when using a battery in this device:
1. Use only the size and type of battery specified.
2. Be sure to follow the correct polarity when installing the battery as indicated next to the battery compartment. A reversed battery may cause damage to the device.
3. If the device is not to be used for a long period of time, remove the battery to prevent damage or injury from possible battery leakage.
4. Do not try to recharge a battery not intended to be recharged; it can overheat and rupture. (Follow battery manufacturer’s directions.)
EFFECTIVE DISTANCE OF THE REMOTE CONTROL TRANSMITTER
NOTES:
• When there is an obstacle between the DVD and the transmitter, the transmitter may not operate.
• When direct sunlight, an
incandescent lamp, fluorescent lamp or any other strong light shines on the Remote Sensor of the DVD, the remote operation may be unstable.
11