Memorex MVDP1076 manual AC Connection, Battery Pack INSERTION/REMOVAL

POWER SOURCES

AC CONNECTION

Insert the small end of the AC adapter into the DC IN jack (located on the side of the unit) and connect the other end to a wall outlet having 120V AC, 60 Hz.

AC Adapter, DC 9V Z

NOTES:

• Use the enclosed AC adapter for this product only.

• Remove both the DC plug and the AC-IN plug to disconnect the AC adapter when not using.

BATTERY PACK INSERTION/REMOVAL
Follow the diagram below to insert or remove the Battery Pack.
1	2

TO REMOVE: Press the PUSH (Release)	TO INSERT: Align the tabs from the Battery
button, then slide the Battery Pack out and	Pack into the holes on the bottom of the main
down.	unit. Then, slide the Battery Pack into the
	main unit until it clicks into place.

7