Memorex MVDP1076 manual Programmed Playback, Programmed up to

DVD OPERATION (CONTINUED)

PROGRAMMED PLAYBACK

The DVD player in this unit has a 16 chapter programmable memory that allows you to program up to 16 chapters on any disc for playback in any desired order. You may program 16 different chapters or you may also program certain chapters to play more than once. To perform Programmed Playback, proceed as follows:

12

	1
While in the Stop mode, press the PROG.		2
	Select the first title to be played back using
button; the Program menu will appear on	the Number buttons 1 to input two digits.
the TV screen.	After inputting the title, press the Navigation
	(®) button 2 to	advance the cursor to the
	chapter.
	Then, select the first chapter to be played
	back using the Number buttons 1 to input
	two digits.
	NOTE: If you incorrectly enter a title or
3	chapter, press the CLEAR button to clear it.
	4
	1	2
Select the next program number using the	Use the Navigation (√,®,π,†) button 1 to select
Navigation (√,®,π,†) button and repeat	"PLAY PROGRAM" at the bottom of the Program
step 2 until all desired chapters have been	menu; then press the ENTER button 2 to begin
programmed (up to 16).	Programmed playback. Playback will begin on the
	first chapter that you programmed and the player
	will continue to play all of the chapters that you
	programmed in the order in which you programmed
	them.
	NOTE: To stop Programmed playback, press the
TO CLEAR ALL OF THE PROGRAM:	Stop (■) button.
While in the Stop mode, press the PROG button, then use the Navigation (√,®,π,†) button to select
"CLEAR ALL" at the bottom of the Program menu; then press the ENTER button to clear the program.

NOTE:
• If the unit is turned off, the disc is changed or the disc compartment door is opened, all the programs
will be cleared.	32