DVD OPERATION
IMPORTANT NOTES:
• After plugging in, the unit will be in the Power Off mode. Press the Power button on the main unit to turn on the unit.
• “ ” will appear on the screen during operation if you try to access a function that is not available on the disc.
• Some discs may take a few seconds to load.
• If a disc is inserted incorrectly, dirty, damaged, or is not present at all, “NO DISC” will appear in the display.
• Always hold the disc without touching either of its surfaces. When inserting a disc, position it with the printed title side facing up, align it with the guides and place it in its proper position.
• It is important that you read the manual that accompanies the DVD disc as there are features that are on this DVD player that cannot be used with certain DVDs. There are also extra features that are different for each DVD disc, so they are not explained in this owner’s manual.
• If the unit is in the Stop mode, Pause mode or if there is no disc in the disc tray, the screen saver will appear on the screen after three minutes.
PLAYBACK OF A DVD
12
Press the POWER button on the main unit | Press the OPEN button to open the disc |
to turn on the unit. | tray, “OPEN” will appear on the screen. |
| Insert a disc with the label side facing up on |
| the disc tray. |
CONTINUED ON THE NEXT PAGE
24