Lowrance electronic LVR-880 US manual Go to Nearest Waypoint Nearest WP, Go to Temporary Waypoint

Page 22

Tip: If you are in the NAV big number screen, just turn the Channel Select knob to immedi- ately access the Waypoint List. Select the new waypoint and press ENT.

3-1-4 Go to Nearest Waypoint (NEAREST WP)

	MENU SELECT				WAYPOINT				NEAREST	WP
	WAYPOINT				WP LIST				R01W04 001
	BACKLIGHT				NEAREST WP					98
	BUDDY LIST				TEMP				R01W01	003
										136

Note: A valid GPS signal must be received to see this selection.

1.Select WAYPOINT then NEAREST WP.

2.Press ENT to display the nearest waypoint with distance and bearing from your current position.

Other waypoints are listed in increasing distance from your current position.

3.Press ENT to set the nearest waypoint as the active waypoint OR move the cursor to another waypoint and then press ENT.

The chosen waypoint is shown on the bottom line of the LCD.

3-1-5 Go to Temporary Waypoint

MENU SELECT

WAYPOINT

TEMP

TEMP1

WAYPOINT

WP LIST

TEMP1

GO

BACKLIGHT

NEAREST WP

TEMP2

TEMP EDIT

BUDDY LIST

TEMP

DELETE

1.Select WAYPOINT then TEMP.

2.Your temporary waypoint list is displayed. There are 3 choices for quick access.

3.Select the temporary waypoint to go to. Press ENT.

4.Press ENT to set the temporary waypoint as the destination waypoint. It is immediately shown on the bottom line of the LCD.

Tip: Hold down MOB and release before the 3 second countdown completes. Your current LL position is stored in TEMP1 to TEMP3 in the waypoint list. If the list is full, a message appears asking if the oldest location can be overwritten:

TEMP WP FULL

DELETE TEMP1?

YES

NO

22	Lowrance - LVR-880 Operation Instructions

Image 22

Contents LVR-880 US LVR-880 EU Important safety information Please read carefully before installation and useContents Radio Menu Select Options DSC Setup Menu DSC Setup Distress Calls General Information FeaturtesHi Lo LCD Symbols and MeaningsSymbol Meaning USA Int CanSame PRiHow to Enter Alphanumeric Data How to put the radio into Menu modeHow to Display and Navigate Menus Beep tones & call alertsSQL Squelch or Threshold Level VOL Volume and PowerRadio Keys Distress Send DSC Distress call16 Priority channel LVR-880EU only 16/9 Priority channel LVR-880US onlyFM FM Stereo Radio IC Hailer mode IC FOG Horn modeMOB Man Overboard GO Reset the Cross Track ErrorNAV Show Waypoint Man OverboardExit MOB Temporary Waypoint16 3CH 3CH Scan mode ALL Scan mode17 + 21 WX Scan Dual Watch ModeScan TRI Watch Mode Weather channel23 PTT 24 H/LRadio Menu Select Options GPS AlertManage your Waypoints List Waypoint Add a new waypointEdit or Delete a Waypoint Go to a New WaypointGo to Nearest Waypoint Nearest WP Go to Temporary WaypointSend Waypoint Data to a Chartplotter Edit or Delete a Temporary WaypointMaintain your buddy list Buddy List Set the Backlighting Level BacklightAdd an Entry Local or Distance Sensitivity LOCAL/DIST Edit or Delete an EntrySet Distance Sensitivity Set the Contrast Level ContrastGPS Data and Time GPS/DATA Set Local SensitivityManually Enter Position and UTC Time Manual Local Time Time OffsetTime Format Options Time Format ZonesTime Display Options Time Disply Position Display Options LL DisplyCourse & Speed Display Options COG/SOG GPS Alert GPS AlertReset to Factory Defaults Reset GPS Simulator GPS SIMRadio Setup Menu Radio Setup Channel UICChannel Names CH Name Select Units Units Ring Volume Ring VolumeKey Beep Volume KEY Beep Internal Speaker Connections INT SpeakerSet the Priority Channel Watch Mode Weather Alerts WX AlertTone Alert Receiving a Same AlertReceiving Same Test Messages Enter a Same Code County IDNmea Protocol COM Port Select a Working Same codeSelect the GPS Source GPS Source Select the FM Region FM RegionDSC Setup Menu DSC Setup WX Alert LVR-880US onlyEnter or Check Your User Mmsi User Mmsi Edit or Delete a Group Name or Group Mmsi Group Setup Create a Group Group SetupMaintain Your Groups Response to Individual Calls Indiv Reply Enter or check your Atis Mmsi Atis MmsiEnable Atis Functionality Atis Select Enable DSC Functionality DSC Select Response Type to LL Polling Calls LL ReplySending and Receiving DSC Calls What is DSC?Sending DSC Calls Send an Individual Call to a Buddy Individual Send an Individual Call IndividualAcknowledgement of an Individual Incoming Call Indiv Reply to the Last Call Last CallSend a Group Call Group Send an All Ships Call ALL ShipsSend Using the Call Log Call LOG Send Using the Distress Log Dist LOGYou can make a distress relay to an individual in the log Request the LL Position of a Buddy LL Request Start or Stop Tracking a Buddy Start Track Track a Buddy Track BuddySelect a Buddy to Track SET Buddy See Section Receiving DSC CallsAdd or Delete a Buddy on Your Track List Tracklist Routine priority only see SectionReceiving an All Ships Call ALL Ships Receiving an Individual Call IndivReceiving a Geographic Area Call Geograph Receiving a Group Call GroupReceiving a Polled Position Call Position Distress Calls Sending a Distress CallReceiving a Distress Call Distress Distress Acknowledgement Distress ACK or Relay Distress RELAppendix a Technical Specifications Lowrance LVR-880US & LVR-880EUSpecifications are subject to change without notice Transceiver blows the fuse when the power is switched on Appendix B TroubleshootingTransceiver will not power up Battery symbol is displayedFM stations are weak no Stereo indicator Appendix C VHF Marine Channel Charts International Channel ChartSpecial Notes on International Channel Usage USA Channel Chart Special Notes on USA Channel Usage Canada Channel Chart Special Notes on Canada Channel Usage Weather Channels Traffic Type Name RemarkEAS Emergency Alert Systems Alerts National Codes Event Codes Message Nature of ActivationHUW Appendix D EU Inland Waterway Channels Country Specific tableGeneral remarks to Country Specific table Explanation of specific footnotes in Country Specific table Appendix E Mmsi and License Information Special Channels0560