Lowrance electronic LVR-880 EU manual Track a Buddy Track Buddy, Select a Buddy to Track SET Buddy

6-14 Track a Buddy (TRACK BUDDY)

You can select a buddy to track; start and stop tracking your buddy, and add or remove bud- dies from your buddy tracklist.

6-14-1 Start or Stop Tracking a Buddy (START TRACK)

Use TRACK START to track the position of a buddy on your TRACKLIST whose status is ON (see the following section.) The buddy’s position is updated at the interval you selected (15, 30, or 60 minutes).

Note: START TRACK will track every buddy on your TRACKLIST whose status is ON.

DSC CALL	TRACK BUDDY	START TRACK	STRAT TRACK
DIST LOG	START TRACK	SEAROSE OFF	YES
LL REQUEST	SET BUDDY	MERMAID ON	NO
TRACK BUDDY	TRACKLIST	SEASPRA ON
MERMAID IV	SEASPRAY
LL REQUEST	LL REQUEST
CALLING...	CALLING...

1.Select DSC CALL then TRACK BUDDY.

2.Select START TRACK.

3.The status of each buddy on your tracklist (ON or OFF) is displayed.

4.Check that the status of the buddy (or buddies) that you want to track is ON, then press ENT.

5.Select YES then press ENT to start tracking (in this example, MERMAID IV and SEASPRAY.)

An LL Request is sent to each buddy on CH70 and your radio waits for your buddy’s LL position to be displayed on the LCD. See Section 6.20 for more information.

(Select NO in the START TRACK page to STOP tracking your buddies.)

6-14-2 Select a Buddy to Track (SET BUDDY)

DSC CALL	TRACK BUDDY	SET BUDDY	SET BUDDY
DIST LOG	START TRACK	SEAROSE OFF	MERMAID IV
LL REQUEST	SET BUDDY	MERMAID OFF	ON
TRACK BUDDY	TRACKLIST		OFF

1.Select DSC CALL then TRACK BUDDY.

2.Select SET BUDDY to show the status of each buddy on your tracklist (ON or OFF).

3.Select the buddy whose status you want to change, then select the new status and press ENT to confirm.

Lowrance - LVR-880 Operation Instructions 53