Lowrance electronic LVR-880 EU, LVR-880 US manual Send Waypoint Data to a Chartplotter

Page 23

3-1-6 Send Waypoint Data to a Chartplotter

You can send waypoint data over NMEA2000 to a compatible chartplotter.

MENU SELECT

WAYPOINT

WP LIST

TEMP2

WAYPOINT

WP LIST

NEW WP TEMP2

WPT

BACKLIGHT

NEAREST WP

MOB

DELETE

BUDDY LIST

TEMP

TEMP1

TX WPT DATA

1.Select WAYPOINT then WP LIST. Your waypoint list is displayed. Press ENT. NEW WP starts to flash.

2.Scroll down to the waypoint whose data you want to send to the chartplotter then press ENT. In the example scroll to TEMP2 then press ENT.

3.Scroll down and select TX WPT DATA and press ENT to send the data.

3-1-7 Edit or Delete a Temporary Waypoint

MENU SELECT

WAYPOINT

TEMP

TEMP2

WAYPOINT

WP LIST

TEMP1

GO

BACKLIGHT

NEAREST WP

TEMP2

TEMP EDIT

BUDDY LIST

TEMP

DELETE

TEMP EDIT

SAVE

TEMP2

NEW WP1

18 46.243 N

YES

NO

160 125.341

E

1.Select WAYPOINT then TEMP. Your temporary waypoint list is displayed.

2.Select the temporary waypoint to edit then select TEMP EDIT.

Note: To delete the temporary waypoint, select DELETE then YES. The temporary waypoint is deleted immediately and the temporary waypoint list is displayed again.

3.The waypoint details are displayed. The cursor is at the first character of the name.

4.Edit the temporary waypoint name OR to edit only the latitude or longitude, press ENT repeatedly until the cursor moves to the required line.

5.When you are finished, press ENT (repeatedly if necessary) until a new LCD appears.

6.Press ENT to store the changes. The waypoint list is displayed again. If more changes are required, repeat steps 2 through 6. Otherwise, press EXIT.

Lowrance - LVR-880 Operation Instructions

23

Image 23

Contents LVR-880 US LVR-880 EU Please read carefully before installation and use Important safety informationContents Radio Menu Select Options DSC Setup Menu DSC Setup Distress Calls Featurtes General InformationUSA Int Can LCD Symbols and MeaningsSymbol Meaning Hi LoPRi SameBeep tones & call alerts How to put the radio into Menu modeHow to Display and Navigate Menus How to Enter Alphanumeric DataDistress Send DSC Distress call VOL Volume and PowerRadio Keys SQL Squelch or Threshold LevelFM FM Stereo Radio 16/9 Priority channel LVR-880US only16 Priority channel LVR-880EU only IC FOG Horn mode IC Hailer modeMan Overboard GO Reset the Cross Track ErrorNAV Show Waypoint MOB Man Overboard16 3CH MOB Temporary WaypointExit 17 + ALL Scan mode3CH Scan mode Weather channel Scan Dual Watch ModeScan TRI Watch Mode 21 WX24 H/L 23 PTTGPS Alert Radio Menu Select OptionsAdd a new waypoint Manage your Waypoints List WaypointGo to a New Waypoint Edit or Delete a WaypointGo to Temporary Waypoint Go to Nearest Waypoint Nearest WPEdit or Delete a Temporary Waypoint Send Waypoint Data to a ChartplotterAdd an Entry Set the Backlighting Level BacklightMaintain your buddy list Buddy List Edit or Delete an Entry Local or Distance Sensitivity LOCAL/DISTSet Local Sensitivity Set the Contrast Level ContrastGPS Data and Time GPS/DATA Set Distance SensitivityLocal Time Time Offset Manually Enter Position and UTC Time ManualZones Time Format Options Time FormatPosition Display Options LL Disply Time Display Options Time DisplyGPS Alert GPS Alert Course & Speed Display Options COG/SOGGPS Simulator GPS SIM Reset to Factory Defaults ResetChannel UIC Radio Setup Menu Radio SetupChannel Names CH Name Internal Speaker Connections INT Speaker Ring Volume Ring VolumeKey Beep Volume KEY Beep Select Units UnitsWeather Alerts WX Alert Set the Priority Channel Watch ModeReceiving a Same Alert Tone AlertEnter a Same Code County ID Receiving Same Test MessagesSelect a Working Same code Nmea Protocol COM PortSelect the FM Region FM Region Select the GPS Source GPS SourceWX Alert LVR-880US only DSC Setup Menu DSC SetupEnter or Check Your User Mmsi User Mmsi Maintain Your Groups Create a Group Group SetupEdit or Delete a Group Name or Group Mmsi Group Setup Enter or check your Atis Mmsi Atis Mmsi Response to Individual Calls Indiv ReplyEnable Atis Functionality Atis Select Response Type to LL Polling Calls LL Reply Enable DSC Functionality DSC SelectSending DSC Calls What is DSC?Sending and Receiving DSC Calls Send an Individual Call Individual Send an Individual Call to a Buddy IndividualReply to the Last Call Last Call Acknowledgement of an Individual Incoming Call IndivSend an All Ships Call ALL Ships Send a Group Call GroupSend Using the Distress Log Dist LOG Send Using the Call Log Call LOGYou can make a distress relay to an individual in the log Request the LL Position of a Buddy LL Request Select a Buddy to Track SET Buddy Track a Buddy Track BuddyStart or Stop Tracking a Buddy Start Track Routine priority only see Section Receiving DSC CallsAdd or Delete a Buddy on Your Track List Tracklist See SectionReceiving an Individual Call Indiv Receiving an All Ships Call ALL ShipsReceiving a Polled Position Call Position Receiving a Group Call GroupReceiving a Geographic Area Call Geograph Sending a Distress Call Distress CallsDistress Acknowledgement Distress ACK or Relay Distress REL Receiving a Distress Call DistressLowrance LVR-880US & LVR-880EU Appendix a Technical SpecificationsSpecifications are subject to change without notice Battery symbol is displayed Appendix B TroubleshootingTransceiver will not power up Transceiver blows the fuse when the power is switched onFM stations are weak no Stereo indicator International Channel Chart Appendix C VHF Marine Channel ChartsSpecial Notes on International Channel Usage USA Channel Chart Special Notes on USA Channel Usage Canada Channel Chart Special Notes on Canada Channel Usage Traffic Type Name Remark Weather ChannelsNational Codes Event Codes Message Nature of Activation EAS Emergency Alert Systems AlertsHUW Country Specific table Appendix D EU Inland Waterway ChannelsGeneral remarks to Country Specific table Explanation of specific footnotes in Country Specific table Special Channels Appendix E Mmsi and License Information0560