Texas Instruments SLEU056 manual EVM Board Operation

Page 21

Chapter 3

EVM Board Operation

This chapter describes the TAS5010−5112F2EVM board operation.

Topic		Page

3.1	Power Supply	. . 3-2
3.2	Setup the TAS5010-5112F2EVM With the S/PDIF Input	. . 3-3
3.3	Setup the TAS5010-5112F2EVM With the Analog Line Input	. . 3-4
3.4	Interfacing the Analog Line Output	. . 3-4
3.5	Controlling the DAP With PC Software	. . 3-4

EVM Board Operation

3-1

Image 21

Contents User’s Guide Products Applications Important NoticeEVM Important Notice EVM Warnings and Restrictions About This Manual Read This FirstPart Number Literature Number Related Documentation From Texas InstrumentsContents Tables FiguresTAS5010−5112F2EVM Features IntroductionTopic −1. Simplified TAS5010−5112F2EVM Block Diagram TAS5010−5112F2EVM FeaturesTAS5010−5112F2EVM Features Page Topic Detailed Description of the EVMMute Board OverviewDescription of Jumper Settings Enable/Disable S/PDIF−MUTE JMP130Double-Speed Control JMP120 Description of Connectors Default Jumper Positioins1 S/PDIF Digital Audio Coaxial/RCA Input J100 2 S/PDIF Optical J101Analog Output Connector J170 Pin No Description Analog Input Connector J160Pin No Pin Description Net Name on Schematic PC and I2C Interface J300Power Supply Connector Loudspeaker Connectors J540, J541, J580, and J581Pin No Description Net Name at Schematic Reference Designator DescriptionDescription of Switches and Buttons Power LED LED223 Description of IndicatorsTemperature Warning LED LED221 Protection Mode LED LED220EVM Board Operation Power the EVM by One Power Supply Power SupplyPower the EVM With Two Power Supplies Load = 6 ΩEqualizer Enable Setup the TAS5010−5112F2EVM With the S/PDIF InputInterfacing the Analog Line Output Setup the TAS5010−5112F2EVM With the Analog Line InputControlling the DAP With PC Software Start-up SequenceHints for Measurement of Performance