Toshiba SD-P2900SR owner manual Connecting to audio equipment, Following setting

Connecting to audio equipment (continued)

Connections

CAUTION

•When you are connecting (via the BITSTREAM/PCM jack) an AV decoder that does not have Dolby Digital, DTS or MPEG2 decoding function, be sure to set “Digital

Out” to “PCM” from the on-screen displays 61 .

Otherwise, high volume sound may damage your hearing as well as the speakers.

•When playing DTS-encoded discs (audio CDs), excessive noise may be output from the analog audio output jacks. To avoid possible damage to the audio system, you should take proper precautions when the analog audio output jacks of the player are connected to an amplification system. To enjoy DTS Digital Surround® playback, an external 5.1 channel DTS Digital Surround® decoder system must be connected to the BITSTREAM/ PCM jack of the player.

Note

•DO NOT connect the BITSTREAM/PCM jack of the player to the AC-3 RF input of a Dolby Digital Receiver. This input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the BITSTREAM/PCM jack of the player.

Connecting to an audio system equipped

with analog audio inputs

Signal flow

To AV OUT	To analog audio inputs
	Red (Right) AUDIO IN	Audio system
	R
	L
	White (Left)
Audio/video cable
(supplied)	Yellow (Video)
	No need to connect.

Make the	Setting	Select:	Page
following setting.	“Digital Out”	“Analog 2ch”	61

70