Harbor Freight Tools 68284, 68285 owner manual Working Through a Blockage

Page 17

Working Through a Blockage

1.If cutting tool becomes lodged in a blockage and Drain Cleaner is still operating, cable will start to wind up or twist. If so, release pressure from Foot Switch and Drain Cleaner motor will stop.

WARNING! Do not let cable build up outside drain.

2.The cable and drum will turn backwards until the tension in the cable is released.

WARNING! Do not remove gloved hand from cable until all the tension is released.

3.Put Power Feed Lever in “reverse” position to pull cable back and free cutting tool from blockage.

4.If motor can’t pull cable out, release pressure from Foot Switch and allow cable to stop spinning. Once cable has stopped spinning, grab cable with both gloved hands and pull cable free.

5.Once tool is free of blockage and is turning again, slowly feed rotating cutting tool back into blockage. Do not force tool through blockage.

Allow cutting tip to break up and work through blockage.

CAUTION: While working through the blockage, tool and cable can get clogged with debris from blockage, preventing further cleaning. The cable and tool will then need to be retrieved from drain and debris removed.

SAFETY

Retrieving Drain Cleaner Cable

1.Once drain is clear, turn on faucet or use a hose to flush debris out.

NOTE: If water flow slows or stops, resume using the drain cleaner to locate and clear blockage further down the drain.

2.To retrieve cable, set Power Feed Lever in reverse (up) position but make sure Rotation Switch is still in Forward position.

WARNING! Do not retrieve cable with Rotation Switch set in Reverse position.

3.Keep one hand on cable. The cable can get caught while being retrieved.

4.Continue retrieving cable until you can pull cable by hand. Release foot from Foot Switch.

WARNING! Do not pull cable from drain while cable is still rotating. The cable can whip around, causing serious injury.

5.Place Rotation Switch in OFF position, dry your hands, unplug machine.

6.Release Tension Knob tension and pull remaining cable from drain by hand and feed into Drain Cleaner. If needed, change cutting tool and continue cleaning.

SETUP

OPERATION

NOTICE

Rotation Switch controls rotation of drum only. DO NOT USE ROTATION SWITCH REVERSE POSITION WHILE REMOVING CABLE FROM PIPE. Use reverse direction only momentarily for relieving pressure or untangling cable from a blockage.

Warranty void if cable damaged from allowing motor to twist excessively against blockage, or if drum is run in reverse long enough to unwind cable.

MAINTENANCE

Item 68284 68285

For technical questions, please call 1-800-444-3353.

Page 17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Email our technical support at tech@harborfreight.com Drain CleanerWork area safety Table of ContentsGeneral Power Tool Safety Warnings Personal safety Electrical safetyPower tool use and care Item 68284Drain Cleaner Safety Warnings ServiceVibration Safety Grounding Ground Fault Circuit Interrupter GfciGrounded Tools Tools with Three Prong Plugs Specifications SymbologyExtension Cords 25´ 50´ 75´ 100´ 150´Functions Setup Before UseModel Model For technical questions, please callCutter Tool Applications Cutting Tool AccessoriesTo Prevent Serious Injury from Accidental Operation Assembly forOperating Instructions Tool Set UpSafety Setup Cable Size Pipe Typical Applications Work Area Set-UpManual Feed Operation For Item Working Through a Blockage Retrieving Drain Cleaner CableIf Cutting Tool Lodges in Drain Freeing Lodged Cutting ToolPower Feed Operation For Item Working Through a Blockage Cleaning/Lubricating Housing Cleaning Drain Cleaner CablesRemoving and Installing Belt Installing Replacement CableProblem Probable Causes Solutions General Cleaning, Maintenance, and LubricationTroubleshooting Parts Lists and Diagrams Parts ListPartDescription Record Product’s Serial Number HereItem 68284 For technical questions, please call Assembly DiagramSafety Setup Operation Maintenance Assembly Diagram Mission Oaks Blvd. PO Box 6009 Camarillo, CA 93011 800 Limited 90 Day Warranty

68284, 68285 specifications

Harbor Freight Tools, a prominent discount tool retailer in the United States, offers a wide range of tools and equipment for both DIY enthusiasts and professionals. Among its extensive product lineup, two notable items are the Harbor Freight Tools model 68285 and model 68284. These tools feature advanced technologies and characteristics that cater to various user needs.

The Harbor Freight Tools 68285 is a multi-tool that stands out for its versatility and function. It's designed with a powerful motor, making it efficient in performing tasks ranging from cutting to sanding. This model features a variable speed control, allowing users to adjust the speed according to the material and task at hand. The oscillating tool design enables precision work in tight spaces, making it an ideal choice for intricate cuts or detailed designs. Its ergonomic handle provides comfort during prolonged use, reducing fatigue and enhancing control.

On the other hand, the Harbor Freight Tools 68284 represents a high-performance oscillating tool. This model emphasizes user-friendly features, including easy blade changes without the need for additional tools. The 68284 is equipped with a powerful motor, ensuring that it can handle heavy-duty applications efficiently. It also includes various attachments to enhance capabilities, such as sanding pads, blades for cutting wood and metal, and scraping tools, which makes it a complete solution for a range of projects.

Both models incorporate advanced technologies that enhance their usability. They are designed with durable construction, ensuring longevity even under rigorous use. The 68285 and 68284 models both feature a compact design, promoting ease of storage and transport.

In terms of safety, these tools come equipped with protective features to minimize the risk of accidents. The soft grip handles are engineered for maximum comfort, while the robust power systems provide reliable performance. These aspects make them suitable for both novice users and seasoned professionals tackling everyday tasks or specialized projects.

Ultimately, the Harbor Freight Tools 68285 and 68284 models exemplify the brand's commitment to quality and affordability. By combining innovative designs and practical features, they provide users with reliable tools that meet a variety of needs, making them valuable additions to any toolkit. Whether used in a home workshop or a professional setting, these tools are built to deliver exceptional performance and versatility.
Top Page Image Contents