Harbor Freight Tools 68285, 68284 Cleaning Drain Cleaner Cables, Cleaning/Lubricating Housing

Page 18

SAFETY

Maintenance and Servicing

Procedures not specifically explained in this manual must be performed only by a qualified technician.

TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:

Turn the Rotation Switch of the tool to its “OFF” position and unplug the tool from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.

TO PREVENT SERIOUS INJURY FROM TOOL FAILURE:

Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use.

Cleaning Drain Cleaner Cables

SETUP

1.Thoroughly flush Drain Cleaner cables with clean water after every use. Doing so will help prevent the build-up of sediment and any drain cleaning chemicals still in the cable.

2.Once cables have been flushed, carefully tip the Drain Cleaner forward to empty out any remaining debris.

3.Once the cable is clean and dry, pull the cable from the drum.

4.Lubricate with oily rag as you feed cable back into drum.

WARNING! Do not attempt to remove a rotating cable.

Cleaning/Lubricating Housing

OPERATION

1.The Drain Cleaner should be cleaned as needed with hot, soapy water and/or disinfectants.

WARNING! Risk of shock! Do not allow water to get into the motor or any other electrical components.

2. Dry Drain Cleaner before storing or using again.

3.For Model 68284 (Power Feed Drain Cleaner), hose out the power-feed assembly with clean water.

4.Once dry, thoroughly lubricate with a lightweight machine oil.

5.If Drain Cleaner drum is removed or changed, grease bearings with good general purpose grease.

Removing and Installing Belt

1.Loosen Belt Guard Knob and slide Belt Guard off from top of Drain Cleaner motor.

2.Use screwdriver to slide belt off back of Drain Cleaner drum.

3.Slide new belt into belt pulley above drum.

4.Slide new belt onto rear of drum until securely in place.

5.Slide Belt Guard pack into place above Drain Cleaner drum. Tighten Belt Guard Knob to lock Belt Guard back into place.

WARNING! Do not operate the Drain Cleaner without the Belt Guard in place.

MAINTENANCE

Installing Replacement Cable

1. Remove old cable by pulling cable completely out.

2. Connect new cable to drum-connecting

Separate cable from drum-connecting cable.

cable and feed cable back into drum.

Page 18

For technical questions, please call 1-800-444-3353.

Item 68284 68285

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Drain Cleaner Email our technical support at tech@harborfreight.comTable of Contents General Power Tool Safety WarningsWork area safety Power tool use and care Electrical safetyPersonal safety Item 68284Service Drain Cleaner Safety WarningsVibration Safety Ground Fault Circuit Interrupter Gfci Grounded Tools Tools with Three Prong PlugsGrounding Extension Cords SymbologySpecifications 25´ 50´ 75´ 100´ 150´Model Setup Before UseFunctions Model For technical questions, please callCutting Tool Accessories Cutter Tool ApplicationsAssembly for To Prevent Serious Injury from Accidental OperationTool Set Up Operating InstructionsSafety Setup Work Area Set-Up Cable Size Pipe Typical ApplicationsManual Feed Operation For Item If Cutting Tool Lodges in Drain Retrieving Drain Cleaner CableWorking Through a Blockage Freeing Lodged Cutting ToolPower Feed Operation For Item Working Through a Blockage Removing and Installing Belt Cleaning Drain Cleaner CablesCleaning/Lubricating Housing Installing Replacement CableGeneral Cleaning, Maintenance, and Lubrication TroubleshootingProblem Probable Causes Solutions PartDescription Parts ListParts Lists and Diagrams Record Product’s Serial Number HereAssembly Diagram Item 68284 For technical questions, please callSafety Setup Operation Maintenance Assembly Diagram Limited 90 Day Warranty Mission Oaks Blvd. PO Box 6009 Camarillo, CA 93011 800

68284, 68285 specifications

Harbor Freight Tools, a prominent discount tool retailer in the United States, offers a wide range of tools and equipment for both DIY enthusiasts and professionals. Among its extensive product lineup, two notable items are the Harbor Freight Tools model 68285 and model 68284. These tools feature advanced technologies and characteristics that cater to various user needs.

The Harbor Freight Tools 68285 is a multi-tool that stands out for its versatility and function. It's designed with a powerful motor, making it efficient in performing tasks ranging from cutting to sanding. This model features a variable speed control, allowing users to adjust the speed according to the material and task at hand. The oscillating tool design enables precision work in tight spaces, making it an ideal choice for intricate cuts or detailed designs. Its ergonomic handle provides comfort during prolonged use, reducing fatigue and enhancing control.

On the other hand, the Harbor Freight Tools 68284 represents a high-performance oscillating tool. This model emphasizes user-friendly features, including easy blade changes without the need for additional tools. The 68284 is equipped with a powerful motor, ensuring that it can handle heavy-duty applications efficiently. It also includes various attachments to enhance capabilities, such as sanding pads, blades for cutting wood and metal, and scraping tools, which makes it a complete solution for a range of projects.

Both models incorporate advanced technologies that enhance their usability. They are designed with durable construction, ensuring longevity even under rigorous use. The 68285 and 68284 models both feature a compact design, promoting ease of storage and transport.

In terms of safety, these tools come equipped with protective features to minimize the risk of accidents. The soft grip handles are engineered for maximum comfort, while the robust power systems provide reliable performance. These aspects make them suitable for both novice users and seasoned professionals tackling everyday tasks or specialized projects.

Ultimately, the Harbor Freight Tools 68285 and 68284 models exemplify the brand's commitment to quality and affordability. By combining innovative designs and practical features, they provide users with reliable tools that meet a variety of needs, making them valuable additions to any toolkit. Whether used in a home workshop or a professional setting, these tools are built to deliver exceptional performance and versatility.
Top Page Image Contents