Harbor Freight Tools 68285, 68284 owner manual Service, Drain Cleaner Safety Warnings

Page 4

Service

Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

Drain Cleaner Safety Warnings

SAFETY

SETUP

OPERATION

MAINTENANCE

1.Maintain labels and nameplates on the tool. These carry important safety information.

If unreadable or missing, contact Harbor Freight Tools for a replacement.

2.Wear ANSI-approved safety impact eye goggles and heavy duty LEATHER work gloves when using the Drain Cleaner. Never grasp

a rotating cable with a rag or cloth glove. Using personal safety devices reduce the risk for injury. Safety impact eye goggles and heavy work gloves are available from Harbor Freight Tools.

3.Avoid unintentional starting.

Prepare to begin work before turning on the tool.

4.Do not force the Drain Cleaner. This tool will do the work better and safer at the speed and capacity for which it was designed.

5.Maintain a safe working environment. Keep the work area well lit. Make sure there is adequate surrounding workspace. Always keep the work area free of obstructions, grease, oil, trash, and other debris. Do not use a power tool in areas near flammable chemicals, dusts, and vapors

6.Unplug the Drain Cleaner from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.

7.Do not leave the Drain Cleaner unattended while running. Turn power off if you

have to leave the Drain Cleaner.

8.Do not allow the cutter to stop turning while the machine is running. This can overstress the cable and may cause twisting, kinking or breaking of the cable. Twisting, kinking or breaking cable may cause striking or crushing injuries.

9.Keep gloved hand on the cable whenever the machine is running. This provides better control of the cable and helps prevent twisting, kinking and breaking of the cable. Twisting, kinking or breaking cable may cause striking or crushing injuries

10.Before each use, check all nuts, bolts, and screws for tightness. Vibration during operation may cause these to loosen.

11.Avoid electrical shock. Do not operate the Drain Cleaner if sitting in standing water, and if the operator is in standing water. Keep extension cord off the ground and away from water.

Water increases the risk of electric shock.

12.Install this product on a proper surface. Locate on a flat, level, and solid surface that is capable of supporting the weight of the Drain Cleaner.

13.Do not operate the Drain Cleaner with the belt guard removed. Fingers can get caught between the drive belt and pulley.

14.Do not put too much stress on cable. Keep gloved hand on the cable for control when machine is running. In the course of drain cleaning, if the cable encounters an obstruction, it may stress the cable and cause the cable to twist, kink, or break. This may result in serious injury, and damage the equipment or pipes.

15.Position Drain Cleaner within two feet of drain opening. Greater distances can result in the cable twisting or kinking.

16.One person must control both the cable and the Foot Switch. If the cutter stops rotating, the operator must be able to turn the machine motor off to prevent twisting, kinking and breaking of the cable. Twisting, kinking or breaking cable may cause striking or crushing injuries.

17.Reverse Motor direction only when pulling the Cable off an obstruction. Trying to push the Cable down the pipe or pull it out of a pipe while in reverse operation can result in Cable damage. Make sure Drum has stopped turning

before changing the Rotation Switch.

18.Keep hands away from the rotating Drum and Distributor Tube. Do not reach into Drum unless the Drain Clean power cord is unplugged.

19.Use appropriate personal protective equipment while handling and using drain cleaning equipment. Drains may contain chemicals, bacteria and other substances that may be toxic, infectious, cause burns or other issues. Appropriate personal protective equipment always includes ANSI- approved safety glasses and heavy-duty work gloves, and may include equipment such as latex or rubber gloves, face shields, goggles, protective clothing, respirators and steel toed footwear.

20.Wash hands after use. Use hot, soapy water to wash hands and other exposed body parts exposed to drain contents after handling or using drain cleaning equipment. Do not eat or smoke while operating or handling drain cleaning equipment. This will help prevent contamination with toxic or infectious material.

Page 4

For technical questions, please call 1-800-444-3353.

Item 68284 68285

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Drain Cleaner Email our technical support at tech@harborfreight.comGeneral Power Tool Safety Warnings Table of ContentsWork area safety Electrical safety Personal safetyPower tool use and care Item 68284Service Drain Cleaner Safety WarningsVibration Safety Grounded Tools Tools with Three Prong Plugs Ground Fault Circuit Interrupter GfciGrounding Symbology SpecificationsExtension Cords 25´ 50´ 75´ 100´ 150´Setup Before Use FunctionsModel Model For technical questions, please callCutting Tool Accessories Cutter Tool ApplicationsAssembly for To Prevent Serious Injury from Accidental OperationTool Set Up Operating InstructionsSafety Setup Work Area Set-Up Cable Size Pipe Typical ApplicationsManual Feed Operation For Item Retrieving Drain Cleaner Cable Working Through a BlockageIf Cutting Tool Lodges in Drain Freeing Lodged Cutting ToolPower Feed Operation For Item Working Through a Blockage Cleaning Drain Cleaner Cables Cleaning/Lubricating HousingRemoving and Installing Belt Installing Replacement CableTroubleshooting General Cleaning, Maintenance, and LubricationProblem Probable Causes Solutions Parts List Parts Lists and DiagramsPartDescription Record Product’s Serial Number HereAssembly Diagram Item 68284 For technical questions, please callSafety Setup Operation Maintenance Assembly Diagram Limited 90 Day Warranty Mission Oaks Blvd. PO Box 6009 Camarillo, CA 93011 800

68284, 68285 specifications

Harbor Freight Tools, a prominent discount tool retailer in the United States, offers a wide range of tools and equipment for both DIY enthusiasts and professionals. Among its extensive product lineup, two notable items are the Harbor Freight Tools model 68285 and model 68284. These tools feature advanced technologies and characteristics that cater to various user needs.

The Harbor Freight Tools 68285 is a multi-tool that stands out for its versatility and function. It's designed with a powerful motor, making it efficient in performing tasks ranging from cutting to sanding. This model features a variable speed control, allowing users to adjust the speed according to the material and task at hand. The oscillating tool design enables precision work in tight spaces, making it an ideal choice for intricate cuts or detailed designs. Its ergonomic handle provides comfort during prolonged use, reducing fatigue and enhancing control.

On the other hand, the Harbor Freight Tools 68284 represents a high-performance oscillating tool. This model emphasizes user-friendly features, including easy blade changes without the need for additional tools. The 68284 is equipped with a powerful motor, ensuring that it can handle heavy-duty applications efficiently. It also includes various attachments to enhance capabilities, such as sanding pads, blades for cutting wood and metal, and scraping tools, which makes it a complete solution for a range of projects.

Both models incorporate advanced technologies that enhance their usability. They are designed with durable construction, ensuring longevity even under rigorous use. The 68285 and 68284 models both feature a compact design, promoting ease of storage and transport.

In terms of safety, these tools come equipped with protective features to minimize the risk of accidents. The soft grip handles are engineered for maximum comfort, while the robust power systems provide reliable performance. These aspects make them suitable for both novice users and seasoned professionals tackling everyday tasks or specialized projects.

Ultimately, the Harbor Freight Tools 68285 and 68284 models exemplify the brand's commitment to quality and affordability. By combining innovative designs and practical features, they provide users with reliable tools that meet a variety of needs, making them valuable additions to any toolkit. Whether used in a home workshop or a professional setting, these tools are built to deliver exceptional performance and versatility.
Top Page Image Contents