Harbor Freight Tools 68285, 68284 Grounded Tools Tools with Three Prong Plugs, Grounding

Page 6

SAFETY

Grounding

TO PREVENT ELECTRIC SHOCK AND DEATH FROM INCORRECT GROUNDING WIRE CONNECTION:

Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the tool. Never remove the grounding prong from

the plug. Do not use the tool if the power cord or plug is damaged. If damaged, have it repaired by a service facility before use. If the plug will not fit the outlet, have a proper outlet installed by a qualified electrician.

Grounded Tools: Tools with Three Prong Plugs

SETUP

OPERATION

2. The grounding prong in the plug is connected through the green wire inside the cord to the grounding system in the tool. The green wire in the cord must be the only wire connected to the tool’s grounding system and must never be attached to an electrically “live” terminal. (See 3-Prong Plug and Outlet.)

 

3. The tool must be plugged into an appropriate outlet,

 

properly installed and grounded in accordance with

 

all codes and ordinances. The plug and outlet should

3-Prong Plug and Outlet

look like those in the preceding illustration.

 

(See 3-Prong Plug and Outlet.)

1.Tools marked with “Grounding Required” have a three wire cord and three prong grounding plug. The plug must be connected to a properly grounded outlet.

If the tool should electrically malfunction or break down, grounding provides a low resistance path to carry electricity away from the user, reducing the risk of electric shock. (See 3-Prong Plug and Outlet.)

Ground Fault Circuit Interrupter (GFCI)

MAINTENANCE

Your machine is equipped with a ground fault circuit interrupter (GFCI), which protects you against shock if a short circuit should occur. Check that the receptacle is properly grounded and test the GFCI before each use.

1.Plug the GFCI Power Plug into a grounded, 120 VAC electrical outlet.

2.Press the TEST button. The GFCI indicator light will go out and power to the machine should cut off.

3.WARNING! If the light does not go out when test button is pushed, equipment should not be used until proper repairs can be made.

4.To restore power after test, push the reset button. WARNING! If the machine doesn’t start,

stops while running, or if you experience a mild shock, do not use the machine. Have it repaired or replaced by a licensed electrician.

Note: The Power Cord is not GFCI protected from the GFCI unit to the 3-prong plug in the electrical outlet.

Page 6

For technical questions, please call 1-800-444-3353.

Item 68284 68285

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Drain Cleaner Email our technical support at tech@harborfreight.comTable of Contents General Power Tool Safety WarningsWork area safety Power tool use and care Electrical safetyPersonal safety Item 68284Service Drain Cleaner Safety WarningsVibration Safety Ground Fault Circuit Interrupter Gfci Grounded Tools Tools with Three Prong PlugsGrounding Extension Cords SymbologySpecifications 25´ 50´ 75´ 100´ 150´Model Setup Before UseFunctions Model For technical questions, please callCutting Tool Accessories Cutter Tool ApplicationsAssembly for To Prevent Serious Injury from Accidental OperationTool Set Up Operating InstructionsSafety Setup Work Area Set-Up Cable Size Pipe Typical ApplicationsManual Feed Operation For Item If Cutting Tool Lodges in Drain Retrieving Drain Cleaner CableWorking Through a Blockage Freeing Lodged Cutting ToolPower Feed Operation For Item Working Through a Blockage Removing and Installing Belt Cleaning Drain Cleaner CablesCleaning/Lubricating Housing Installing Replacement CableGeneral Cleaning, Maintenance, and Lubrication TroubleshootingProblem Probable Causes Solutions PartDescription Parts ListParts Lists and Diagrams Record Product’s Serial Number HereAssembly Diagram Item 68284 For technical questions, please callSafety Setup Operation Maintenance Assembly Diagram Limited 90 Day Warranty Mission Oaks Blvd. PO Box 6009 Camarillo, CA 93011 800

68284, 68285 specifications

Harbor Freight Tools, a prominent discount tool retailer in the United States, offers a wide range of tools and equipment for both DIY enthusiasts and professionals. Among its extensive product lineup, two notable items are the Harbor Freight Tools model 68285 and model 68284. These tools feature advanced technologies and characteristics that cater to various user needs.

The Harbor Freight Tools 68285 is a multi-tool that stands out for its versatility and function. It's designed with a powerful motor, making it efficient in performing tasks ranging from cutting to sanding. This model features a variable speed control, allowing users to adjust the speed according to the material and task at hand. The oscillating tool design enables precision work in tight spaces, making it an ideal choice for intricate cuts or detailed designs. Its ergonomic handle provides comfort during prolonged use, reducing fatigue and enhancing control.

On the other hand, the Harbor Freight Tools 68284 represents a high-performance oscillating tool. This model emphasizes user-friendly features, including easy blade changes without the need for additional tools. The 68284 is equipped with a powerful motor, ensuring that it can handle heavy-duty applications efficiently. It also includes various attachments to enhance capabilities, such as sanding pads, blades for cutting wood and metal, and scraping tools, which makes it a complete solution for a range of projects.

Both models incorporate advanced technologies that enhance their usability. They are designed with durable construction, ensuring longevity even under rigorous use. The 68285 and 68284 models both feature a compact design, promoting ease of storage and transport.

In terms of safety, these tools come equipped with protective features to minimize the risk of accidents. The soft grip handles are engineered for maximum comfort, while the robust power systems provide reliable performance. These aspects make them suitable for both novice users and seasoned professionals tackling everyday tasks or specialized projects.

Ultimately, the Harbor Freight Tools 68285 and 68284 models exemplify the brand's commitment to quality and affordability. By combining innovative designs and practical features, they provide users with reliable tools that meet a variety of needs, making them valuable additions to any toolkit. Whether used in a home workshop or a professional setting, these tools are built to deliver exceptional performance and versatility.
Top Page Image Contents