Harbor Freight Tools 68284, 68285 General Cleaning, Maintenance, and Lubrication, Troubleshooting

Page 19

General Cleaning, Maintenance, and Lubrication

1.BEFORE EACH USE, inspect the general condition of the tool. Check for:

•loose hardware,

•misalignment or binding of moving parts,

•cracked or broken parts,

•damaged electrical wiring, and

•any other condition that may affect its safe operation.

Troubleshooting

2.AFTER USE, wipe external surfaces of the tool with clean cloth.

3.WARNING! If the supply cord of this power tool is damaged, it must be replaced only by a qualified service technician.

SAFETY

Problem

 

Probable Cause(s)

 

Solution(s)

Motor shuts off

1.

The motor may have been shut off

1.

Turn motor off. Allow motor to cool off

during use.

 

by its internal thermal protection

 

completely before restarting and stay clear

 

 

switch, or auto reset breaker.

 

of cable when turning motor back on.

 

2.

GFCI breaker tripped.

2.

Make sure all electrical components are dry and

 

 

 

 

all insulation is in good repair. Press reset button.

 

 

 

 

If GFCI trips again, have machine serviced

 

 

 

 

by qualified electrician before further use.

Cable kinks, twists,

1.

Too much force on the cable.

1.

Do not force cable. Let cutter do the work.

or breaks.

2.

Too much slack between

2.

Move Drain Cleaner to within two

 

 

Drain Cleaner and drainpipe inlet.

 

feet of drainpipe inlet.

 

3.

Cable used is wrong

3.

Change cable size.

 

 

size for drain pipe.

 

 

 

4.

Cable exposed to acid.

4.

Clean and oil cable regularly.

 

5.

Cable worn out.

5.

Replace cable.

Cable tangles in drum.

1.

Too much force on the cable.

1.

Do not force cable. Let cutter tool do the work.

 

2.

Motor running in reverse.

2.

Retract Cable with the Motor Direction

 

 

 

 

Switch in the Forward position.

 

3.

Distributor tube frozen.

3.

Technician should lubricate

 

 

 

 

distributor tube bearings.

Power Cord GFCI

1.

Motor Direction Switch defective.

1.

Repair or replace Motor Direction Switch.

trips when unit is

2.

Frayed Power Cord.

2.

Repair or replace the Power Cord.

plugged in or when

3.

Short circuit in Motor.

3.

Have Motor repaired by a qualified

Foot Pedal is pressed.

 

 

 

 

technician; Replace Motor.

 

4.

Excess moisture touching Power

4.

Dry cord and unit.

 

 

Cord or Drain Cleaner.

 

 

 

5.

Faulty GFCI unit.

5.

Electrician must Replace Power Cord with GFCI.

Motor does not

Pneumatic Foot Pedal may have a leak.

Check for leaks in air line leading from

operate or

 

 

Foot Pedal. Check for tears and holes

the Foot Pedal sticks.

 

 

in Foot Pedal. Replace if needed.

The “Forward/

The centrifugal switch requires the

Move the “Forward/Reverse” Switch to the “Off”

Reverse” Switch

motor to come to a complete stop

position and allow the motor to stop before changing

does not work.

before it will allow the direction

from “Forward” to “Reverse” or vice versa.

 

of the motor to be changed.

 

 

SETUP

OPERATION

MAINTENANCE

Item 68284 68285

For technical questions, please call 1-800-444-3353.

Page 19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Email our technical support at tech@harborfreight.com Drain CleanerGeneral Power Tool Safety Warnings Table of ContentsWork area safety Item 68284 Electrical safetyPersonal safety Power tool use and careDrain Cleaner Safety Warnings ServiceVibration Safety Grounded Tools Tools with Three Prong Plugs Ground Fault Circuit Interrupter GfciGrounding 25´ 50´ 75´ 100´ 150´ SymbologySpecifications Extension CordsModel For technical questions, please call Setup Before UseFunctions ModelCutter Tool Applications Cutting Tool AccessoriesTo Prevent Serious Injury from Accidental Operation Assembly forOperating Instructions Tool Set UpSafety Setup Cable Size Pipe Typical Applications Work Area Set-UpManual Feed Operation For Item Freeing Lodged Cutting Tool Retrieving Drain Cleaner CableWorking Through a Blockage If Cutting Tool Lodges in DrainPower Feed Operation For Item Working Through a Blockage Installing Replacement Cable Cleaning Drain Cleaner CablesCleaning/Lubricating Housing Removing and Installing BeltTroubleshooting General Cleaning, Maintenance, and LubricationProblem Probable Causes Solutions Record Product’s Serial Number Here Parts ListParts Lists and Diagrams PartDescriptionItem 68284 For technical questions, please call Assembly DiagramSafety Setup Operation Maintenance Assembly Diagram Mission Oaks Blvd. PO Box 6009 Camarillo, CA 93011 800 Limited 90 Day Warranty

68284, 68285 specifications

Harbor Freight Tools, a prominent discount tool retailer in the United States, offers a wide range of tools and equipment for both DIY enthusiasts and professionals. Among its extensive product lineup, two notable items are the Harbor Freight Tools model 68285 and model 68284. These tools feature advanced technologies and characteristics that cater to various user needs.

The Harbor Freight Tools 68285 is a multi-tool that stands out for its versatility and function. It's designed with a powerful motor, making it efficient in performing tasks ranging from cutting to sanding. This model features a variable speed control, allowing users to adjust the speed according to the material and task at hand. The oscillating tool design enables precision work in tight spaces, making it an ideal choice for intricate cuts or detailed designs. Its ergonomic handle provides comfort during prolonged use, reducing fatigue and enhancing control.

On the other hand, the Harbor Freight Tools 68284 represents a high-performance oscillating tool. This model emphasizes user-friendly features, including easy blade changes without the need for additional tools. The 68284 is equipped with a powerful motor, ensuring that it can handle heavy-duty applications efficiently. It also includes various attachments to enhance capabilities, such as sanding pads, blades for cutting wood and metal, and scraping tools, which makes it a complete solution for a range of projects.

Both models incorporate advanced technologies that enhance their usability. They are designed with durable construction, ensuring longevity even under rigorous use. The 68285 and 68284 models both feature a compact design, promoting ease of storage and transport.

In terms of safety, these tools come equipped with protective features to minimize the risk of accidents. The soft grip handles are engineered for maximum comfort, while the robust power systems provide reliable performance. These aspects make them suitable for both novice users and seasoned professionals tackling everyday tasks or specialized projects.

Ultimately, the Harbor Freight Tools 68285 and 68284 models exemplify the brand's commitment to quality and affordability. By combining innovative designs and practical features, they provide users with reliable tools that meet a variety of needs, making them valuable additions to any toolkit. Whether used in a home workshop or a professional setting, these tools are built to deliver exceptional performance and versatility.
Top Page Image Contents