User Manual |
| Heat Controller, Inc. |
|
|
|
5.6 OTHER SETTINGS
5.6.1 SCREEN SETTINGS
Adjust the Screen settings using the up/down arrow buttons. Press the center button to save changes.
•Fahrenheit or Celsius (default Fahrenheit): adjusts the temperature scale
•12 or 24 Hour Clock (default 12 Hour Clock): adjusts the clock format
•Language (default English)
•Contrast (default 4): adjusts the screen contrast
- options: 1 to 15
•Backlight On Time (default 30 seconds): After a button press, the backlight stays on for the selected amount of time - options: 30 to 120 seconds, ON (in 30 second increments)
•Date Display (default MM/DD/YY): adjusts the date format
5.6.2 OFFSETS
Not recommended for user access. Contact your dealer for changes.
5.6.3 CYCLES PER HOUR
Not recommended for user access. Contact your dealer for changes.
5.6.4 AUTO CHANGEOVER TIME
Not recommended for user access. Contact your dealer for changes.
5.6.5 PROGRAM SETTINGS
Set additional system parameters related to program scheduling and system operation.
5.6.5.1 SMART RECOVERY
Smart recovery is a feature designed to save energy by gradually adjusting temperatures. When it is time for a program schedule temperature change, smart recovery begins working in advance, turning the system on and off as needed to slowly adjust the indoor temperature so that
it reaches the program temperature setpoints at the time you set. Rather than waiting to start the equipment until the program time has occurred.
Adjust the Smart Recovery setting using the up/ down arrow buttons. Press the center button to save changes.
•Events Per Day (default On): options: ON,
OFF
NOTE 1: The thermostat must be configured for programmable mode by installer to access the Smart Recovery setting.
NOTE 2: Auxiliary heat will not be used during Smart Recovery.
5.6.5.2 EVENTS PER DAY
NOTE: The thermostat must be configured for programmable mode by installer to access the Events per Day setting.
Events Per Day sets the number of program schedule events for each day. An event is a period of time scheduled with a certain heat setpoint, cool setpoint, and fan mode.
Adjust the Events Per Day setting using the up/ down arrow buttons. Press the center button to save changes.
•Events Per Day (default 4 events): options:
5.6.5.3 SMART HEAT STAGING
When there is auxiliary heating demand, Smart Heat Staging defines the minimum amount of time to wait before activating auxiliary heating. If you find that the thermostat is operating auxiliary heating equipment too quickly/slowly, this setting allows for adjustment to correct the temperature algorithm.
Adjust the Smart Heat Staging setting using the up/ down arrow buttons. Press the center button to save changes.
•Smart Heat Staging (default Off): options: OFF, 5 – 120 minutes (in 5 minute increments)
5.6.5.4 ELECTRIC HEAT LOCKOUT
Electric heat lockout keeps electric heat turned off if the outdoor temperature is above the specified temperature so as only to use electric heat when necessary.
Adjust the Electric Heat Lockout setting using the up/down arrow buttons. Press the center button to save changes.
•Electric Heat Lockout (default Off): options: OFF, 5 – 60°F (in 5°F increments)
NOTE: An outdoor temperature sensor must be installed for this feature to work.
5.6.5.5PROGRAMMED DEMAND REDUCTION Programmed Demand Reduction is a feature designed to reduce your electric load during preselected time periods in which peak utility rates are high. You can program your thermostat to reduce the electric load by limiting operation or capacity during the high utility rate time period that you specify for each day of the week.
While the Programmed Demand Reduction mode is active, the thermostat outputs will be limited by the Programmed Demand Reduction option selected below.
10