Heat Controller 7602-443 user manual Hold this Temperature Until 500 PM, Permanent

Page 8

User Manual

7602-443 COMMUNICATING, PROGRAMMABLE THERMOSTAT

Heat Controller, Inc.

 

 

 

Heat Setpoint (default current Heat Setpoint): valid range: 55°F to Maximum Heating Setpoint Limit (section 5.6.8)

Cool Setpoint (default current Cool Setpoint): valid range: Minimum Cooling Setpoint Limit (section 5.6.8) to 95°F

NOTE: The thermostat forces a 2°F “dead-band” between the Heating and Cooling setpoints. While adjusting the Heating setpoint, the Cooling setpoint may be automatically increased to enforce a 2°F “dead-band”. Likewise, while adjusting the Cooling setpoint, the Heating setpoint may be automatically reduced to enforce a 2°F “dead-band”.

5.2.1.2 HOLD TIME

Set the Vacation Hold time period.

Adjust the date using the up/down arrow buttons. Press the center button to save changes.

Date (default current Date): in 1 day increments

Time (default current Time): in 10 minute increments

5.2.2 PERMANENT

The thermostat can be programmed to hold the temperature and override the program schedule permanently.

The Permanent Hold Display Mode shows either one (in Heat, Cool, or Emergency Heat modes) or both (in Auto mode) temperature setpoints. Adjust the setpoints using the up/down arrow buttons. Navigate between setpoints using the left/right arrow buttons. Press the center button to save changes.

Heat Setpoint (default current Heat Setpoint): valid range: 55°F – Maximum Heating Setpoint Limit (section 5.6.8)

Cool Setpoint (default current Cool Setpoint): valid range: Minimum Cooling Setpoint Limit (section 5.6.8) – 95°F

NOTE: The thermostat forces a 2°F “dead-band” between the Heating and Cooling setpoints. While adjusting the Heating setpoint, the Cooling setpoint may be automatically increased to enforce a 2°F “dead-band”. Likewise, while adjusting the Cooling setpoint, the Heating setpoint may be automatically reduced to enforce a 2°F “dead-band”.

HOLD THIS

TEMPERATURE

UNTIL 5:00 PM

HEAT COOL

70° 74°

CHANGE SET TEMP

PREVIOUS SAVE

HOLD THIS

TEMPERATURE

UNTIL 5:00 PM

HEAT COOL

70° 74°

CHANGE SET TEMP

PREVIOUS SAVE

8

Image 8
Contents Communicating, Programmable Thermostat Table of Contents Operating Mode Selection Menu Navigation ShortcutsChange SET Temp Previous Save Temperature AdjustmentFan Mode Selection Humidity Level Adjustment Setpoint Heat Cool RH Temp Mode FAN Menu Humidity ControlSettings Main Menu Options OverviewRH Temp Mode FAN Menu Main Menu Main MenuMain Menu SET Date and Time Hold MenuHold this Temperature Until 500 PM PermanentProgram Menu Copy Heat Cool FANAuto Leave AutoOther Settings Screen Settings Program SettingsSmart Recovery OffsetsProgrammed Demand Reduction Mode Demand Reduction Option for Program OperationProgrammed Demand Reduction Operation For Climadry Programmed Demand Reduction FAN OperationFault Staus Active Fault Fault Code E2 High Refrig PressureProgrammed Demand Reduction Schedule Start END Time MON TUETemperature Status Total Keypad Lockout Select Option Previous Save Main Menu SET Date and Time Hold Program FAN Mode SettingsSecurity Lockout Service Needed Night Setback FAN OperationRevision History