Heat Controller REG-183A, REG-243A Window installation of room air conditioner is now Completed

Installation

5. Pull each Frame curtain fully to each window sash track, and pull the bottom window sash down behind the Top retainer bar until it meets.

6. Attach each Frame curtain the window sash by using screws (Type C). (See Fig. 10)

Figure 10

Screw(Type C)

7. Slide the unit into the cabinet. (See Fig. 11)

CAUTION: For security purpose, rein- stall screws (Type A) at cabinet's sides.

8.Cut the Foam-strip to the proper length and insert between the upper window sash and the lower window sash. (See Fig. 12)

Power Cord

Screw Screw (Type A)

Figure 11

Foam-Strip

Figure 12

9.Attach the Window locking bracket with a screw (Type C). (See Fig. 13)

10.Attach the front grille to the cabinet by inserting the tabs on the grille into the tabs on the front of the cabi- net. Push the grille in until it snaps into place. (See Fig.34)

11.Lift the inlet grille and secure it with a screw (Type A) through the front grille. (See Fig. 14)

Window locking bracket

Figure 13

Figure 14

12. Window installation of room air conditioner is now
completed.
Figure 15
Service Manual	12