Operating ControlsFor Electronic units | Heat Controller RAH-123G

Heat Controller, Inc.	Room Air Heat Pump with R-410A	Owner’s Manual

Operating Controls(For Electronic units)

Operating your air conditioner properly helps you to obtain the best possible results.

This section explains proper air conditioner operation.

IMPORTANT:

■If you turn off the air conditioner, wait at least 3 minutes before turning it back on. This prevents the air conditioner from blowing a fuse or tripping a circuit breaker.

■Ddo not trytooperateyourairairconditionerininthethecoolingcoolingmodemode when outside temperatureisisbelow61°F61°F(16°C)(16°C). do. Dnotnottrytryto to operate your air conditioner in the heating mode when operate your air conditioner in the heating mode when outside outside temperature is over 86°F (30°C). Otherwise, the temperature is over 86°F (30°C). The inside evaporator coil inside evaporator coil will freeze up, and the air conditioner will freeze up, and the air conditioner will operate properly. will operate properly.

NOTE: In the event of a power failure, your air conditioner will operate at the previous settings when the power is restored.

Controls

Power Pad

Turns air conditioner on and off.

Display

Shows the set temperature when in Heat/Cool/Energy Saver mode.Shows time remaining on the delay timer. Shows the room temperature when

in Fan Only mode. The Set light will turn on while setting.

Lights next to the touch pads on the air conditioner control panel indicate the selected settings.

	The display shows the set temperature when	Light indicates the unit
	in Heat/Cool/Energy Saver mode. Shows time
		is in the temperature or
	remaining on the delay timer. Shows the room
		delay time Set mode.
	temperature when in Fan Only mode.

POWER					+
Power			Set
		Set	Set
		Set	Temp / DelayTEMP/TIMER
AUTO	HEAT		Temp / DelayTEMP/TIMER
AUTO	HEAT
Auto	Heat
HIGH	COOL				-
High	Cool
MEd	ENERGY SAVER
Med	Energy Saver
LOW	FAN ONLY
Low	Fan Only
FAN	MOdE	SWING Delay		TIMER
Fan	MOdE	SWING Delay
SPEEdSpeed	ode		0.5-24 HR
SPEEdSpeed			1-24hr
	Light indicates		Light indicatesi		the
	SWING is on.		delay timer is set..

Air Conditioner Controls

Delay0.5-24hr	Delay timer Increase
Delay timer
Decrease
Mode select	Auto Fan on
Fan speed	Fan speed Increase
Decrease
Temperature	Unit power on/off
set Increase
and Decrease

Remote Control

Temp Increase ▲ /Decrease ▼ Pads

Use to set temperature when in Heat (on some models)/Cool/Energy Saver The Set light will turn on while setting.

Press Increase(+) and Decrease (-) Pads at the same time for 3 seconds,Temperature display will change between oÑF andoC.

Timer/DelayTimer Increase � (+) /Decrease �

(Æ-Pads)

Each touch of the Increase � / Decrease � pads on the unit or the Increase + / Decrease – pads on the remote control will set the delay time when using the Delay0.5–24hr timer. The Set light will turn on while setting.

Fan Speed Pads

Use to set the fan speed to Low, Med, High or Auto on the unit. NOTE: On the remote control, use the fan speed Increase + / Decrease – pads to set the fan speeds to Low, Med or High. Use the Auto pad to turn Auto fan on.

Mode Pad

Use to set the air conditioner to Cool, Energy Saver,Fan Only or Heat (on some models) mode.

Timer/DelayPads Pads

Timer/DelayON—WhenOn—theWhenairtheconditiconditionerair s off,isit off, it can be set to automatically come on in 0.5 to

24 hours at its previous mode and fan settings.

RAH-123G specifications

The Heat Controller RAH-123G stands out in the realm of climate control solutions, offering advanced features and technologies that enhance comfort while prioritizing energy efficiency. As a split system air conditioner, the RAH-123G is specifically designed to provide both heating and cooling functions, making it a versatile choice for year-round usage.

One of the main features of the RAH-123G is its impressive energy efficiency rating. With a high SEER (Seasonal Energy Efficiency Ratio) rating, this model ensures that users can enjoy consistent temperature regulation without the worry of skyrocketing energy bills. The energy-saving design not only benefits the environment but also provides long-term savings for homeowners.

The unit employs state-of-the-art inverter technology, allowing for variable speed operation. This means that the compressor adjusts its speed according to the desired temperature, leading to smoother airflow and enhanced comfort levels. The inverter technology also minimizes noise, making the RAH-123G one of the quieter options available on the market, which is ideal for bedrooms and living spaces.

Another notable characteristic of the RAH-123G is its advanced filter system, which effectively captures dust, allergens, and other airborne particles. This is particularly important for households with allergy sufferers, as it ensures the air quality is not compromised. The filters are easy to access and clean, promoting regular maintenance and longevity of the unit.

Additionally, the RAH-123G comes equipped with smart technology, allowing it to be controlled via a user-friendly app on smartphones or tablets. This feature provides the convenience of monitoring and adjusting settings remotely, ensuring that your home is at the perfect temperature before you even arrive.

The sleek and modern design of the RAH-123G complements any interior decor, making it an aesthetically pleasing addition to any home. Installation is straightforward, and the unit is built with durability in mind, ensuring it will perform reliably for years to come.

In summary, the Heat Controller RAH-123G is a formidable contender in the arena of heating and cooling solutions. Its combination of energy efficiency, advanced inverter technology, superior air filtration, and smart home integration makes it an excellent investment for those looking to enhance their home comfort. Whether battling the heat of summer or the chill of winter, the RAH-123G is equipped to maintain the ideal climate all year round.