Controls / Power Supply, Battery indication

		CONTROLS / POWER SUPPLY

Remote Control AY 3785 ( see figure 2 )
1 p		3.5 mm headphone plug to connect to headphones socket
2	2;	switches the set on, starts playback and interrupts playback
3	9	stops playback and switches the set off
4	∞ / §	skips and searches forward / backward tracks
5 HOLD		locks all buttons (on the remote control only)

Batteries (supplied or optionally available)

For convenience, this model is designed with 2 different detachable battery doors. This allows you to operate the player using 2 choices of battery size. You can use the following batteries with this CD-player:

•alkaline batteries type AAA (LR03, UM4) or AA (LR6, UM3) preferably Philips.

Notes:– Old and new or different types of batteries should not be combined.

–Remove batteries if they are empty or if the player is not going to be used for a long time.

6VOLUME −/+ ......adjusts the volume

Connecting the remote control

Use the AY 3785 cord remote control.The buttons on the remote control have the same functions as

Inserting AAA (LR03, UM4) or AY 3363 batteries

1Open the AAA battery door.

2Insert AAA batteries as shown onto the back of the door.

3Replace the battery-loaded AAA door back onto the set.

+	+
/UM4	+
LR03/AAA
-

AAA (LR03, UM4)

the corresponding buttons on the set.

1	Press 9 twice to switch off the set.	p
1	Press 9 twice to switch off the set.
2	Firmly connect the remote control to LINE

Inserting AA (LR6, UM3) batteries

To double playback time, insert AA batteries into the bat- tery compartment and use the AA marked battery door.

•Open the battery compartment and insert either 2 normal or alkaline batteries.

-
AA SIZE
LR6	/ UM3

OUT/p on the set.

3Firmly connect the headphones to the plug on the remote control.

4On the remote control press 2; to switch on the set and to start playback.

5Adjust the volume on the CD player or your remote control.

Notes: – Check the HOLD switch on the remote control is adjusted to the off position if you wish to operate the player using the remote control.

AA (LR6, UM3)

Battery indication

The approximate power level of your batteries is shown in the display.

Battery full

Battery two-thirds full

Battery one-third full

Battery dead or empty. When the batteries are

dead or empty, the symbol flashes, bAtt is displayed, and the beep tone sounds repeatedly.