Philips EXP503 manual Accessories, In-car connections supplied or optionally available

Accessories

In-car connections (supplied or optionally available)

Only use the AY 3545 car voltage converter (4.5 V DC, positive pole to the center pin) and the AY 3501 car adapter cassette. Any other product may damage the unit.

English

1Put the unit on a horizontal, vibration-free and stable surface. Make sure it is in a safe place, where the unit is neither a danger nor an obstacle to the driver and the passengers.

2Connect the DC plug of the voltage converter to 4.5V DC on the unit (only for a 12 V car battery, negative grounding).

4.5 V DC

O F F •

R

E

SU

M

E

L

3Insert the voltage converter into the cigarette

lighter jack. If necessary, clean the cigarette lighter jack to obtain a good electrical contact.

4Turn down the volume and connect the adapter cassette plug to LINE OUT/p on the unit.

5Carefully insert the adapter cassette into the car radio’s cassette compartment.

6Make sure the cord does not hinder your driving.

7Set VOL E on the unit to position 8. Start playback on the unit and adjust the sound with the car radio controls.

Always remove the voltage converter from the cigarette lighter jack when the unit is not in use.

Note: If your car radio has a LINE IN jack, it is better to use it for the

car radio connection instead of the adapter cassette. Connect the signal lead to this LINE IN jack and to LINE OUT/p on the unit.

25