Operation
Auto
A
TEMP
ON 3
HEALTH | OFF | 1 | FAN |
5 4
MODE HEALTH AIRFLOW
SLEEP FRESH SWING
CLOCKSET
TIMERSTERILIZE
RESET CODE LIGHT LOCK
1Press ON/OFF button Unit starts running.
The previous status appears on the display (except. TIMER, SLEEP mode)
2Press MODE button. For each press, operation mode changes as follows:
Remote | AUTO COOL DRY FAN HEAT |
controller |
Select Auto run,
" 
" appears and auto run starts.
3Select temp. button Press TEMP button
Every time the button is pressed, temp. setting increases 1
C
Every time the button is pressed, temp. setting decreases 1 
C
If the button is kept pressed, setting will increase or decrease quickly.
4Press FAN,For each press, operation mode changes as follows:
Remote | LOW MID HIGH AUTO |
controller |
Unit runs at the speed displayed on LCD.
When fan speed is AUTO,it is changed automatically according to the indoor temperature.
5 Press ON/OFF button Unit stops running.
Note:
During Auto run operation, temp. setting will be shown in LCD display, unit will select heating, cooling or fan operation according to the room temp.
9