Operation | Timer on/off operation |
|
|
Remote control unit
TIMER operation
Set Clock correctly before starting Timer operation (refer to page 2)
You can let unit start or stop automatically at following times: Before you wake up in the morning, or get back from outside or after you fall asleep at night.
TIMER ON/OFF
(1)After unit start, select your desired operation mode. Operation mode will be displayed on LCD.
(2)TIMER mode selection
Press TIMER button to change TIMER mode.
Every time the button is pressed, display changes as follows:
Remote controller
|
| ON |
|
| OFF |
|
| ON |
| OFF |
| BLANK |
|
| AM 12:00 | PM 12:00 | AM 12:00 | PM 12:00 |
|
| |||||||
| TIMER ON | TIMER OFF |
| TIMER |
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A
Select your desired TIMER mide (TIMER ON or TIMEROFF) ON or OFF will flash.
(3) Timer setting
Press HOUR
/ 
button.
Every time the button is pressed, time increases 10 min, If button is kept pressed, time will change quickly.
Every time the button is pressed, time decreases 10 min, If button is kept pressed, time will change quickly. Time will be shown on LCD. It can be adjusted within 24 hours.
(4) Confirming your setting
After setting correct time, press SET button to confirm, " ON " or " OFF " stops flashing.
Time displayed: Unit starts or stops at x hour x min (TIMER ON or TIMER OFF)
Timer mode indicator on indoor unit lights up.
To cancel TIMER mode
Just press TIMER button several times until TIMER mode disappears.
Hints
| TEMP |
|
| ON |
|
HEALTH | OFF | FAN |
MODE | HEALTH AIRFLOW |
|
SLEEP FRESH SWING
CLOCKSET
TIMERSTERILIZE
RESET CODE LIGHT LOCK
After replacing batteries or a power failure happens, Time setting should be reset.
Remote controller possesses memory function when use TIMER mode next time, just Press SET button after mode selecting if timer setting is the same as previous one.
16