Haier AS122XVERA, AS182XVERA, AS072XVERA, AS092XVERA Heating, Auto Cool DRY FAN Heat

Operation

Heating

Note: For cooling only type, this function is invalid.

A

		TEMP
3		ON	3
HEALTH		1OFF	FAN
		5	4
	MODE	HEALTH AIRFLOW
2	SLEEP	FRESH	SWING
	CLOCK		SET
	TIMER	STERILIZE
	RESET	CODE LIGHT	LOCK

1Press ON/OFF button Unit starts running.

The previous status appears on the display (except. TIMER, SLEEP mode)

2Press MODE button. For each press,operation mode changes as follows:

AUTO COOL DRY FAN HEAT

Select Heating operation " " appears and Heating operation starts.

3Select temp. button

Press TEMP button

Every time the button is pressed, temp. setting increases 1C

Every time the button is pressed, temp. setting decreases 1C

If the button is kept pressed, setting will increase or decrease quickly.

4Press FAN button. For each press, fan speed changes as follows:

LOW MID HIGH AUTO

In heat mode,warm air will blow out after a short period of time due to cold-draft prevention function.

5Press ON/OFF button

Unit stops running, and when entering this mode for the next time, it will show the previous setting.

13