Operation
Fan
A
| TEMP |
|
| ON |
|
HEALTH | 1OFF | FAN |
| 4 | 3 |
MODE | HEALTH AIRFLOW |
|
2 | SLEEP | FRESH | SWING |
| CLOCK |
| SET |
| TIMER |
| STERILIZE |
| RESET | CODE LIGHT | LOCK |
1Press ON/OFF button Unit starts running.
The previous status appears on the display (except. TIMER, SLEEP mode)
2Press MODE button. For each press,operation mode changes as follows:
Remote | AUTO COOL DRY FAN HEAT |
controller |
Select Fan operation shows " 
", Fan operation starts.
3Press FAN button. For each press, fan speed changes as follows:
LOW MID HIGH
Unit runs at the speed displayed on LCD.
4Press ON/OFF button
Unit stops running, and when entering this mode for the next time, it will show the previous setting.
Note:
In this mode, temp. can't be selected, temp.setting will not be shown in LCD display.In Fan operation mode, "AUTO" fan speed is not available. Operation cycles are as follows:
LOW 
MID 
HIGH
12