Operation
Heating
Note: For cooling only type, this function is invalid.
A
|
| TEMP |
|
3 |
| ON | 3 |
|
| ||
HEALTH |
| 1OFF | FAN |
|
| 5 | 4 |
| MODE | HEALTH AIRFLOW |
|
2 | SLEEP | FRESH | SWING |
| CLOCK |
| SET |
| TIMER | STERILIZE | |
| RESET | CODE LIGHT | LOCK |
1Press ON/OFF button Unit starts running.
The previous status appears on the display (except. TIMER, SLEEP mode)
2Press MODE button. For each press,operation mode changes as follows:
AUTO COOL DRY FAN HEAT
Select Heating operation " 
" appears and Heating operation starts.
3Select temp. button
Press TEMP button
Every time the button is pressed, temp. setting increases 1
C
Every time the button is pressed, temp. setting decreases 1
C
If the button is kept pressed, setting will increase or decrease quickly.
4Press FAN button. For each press, fan speed changes as follows:
LOW MID HIGH AUTO
In heat mode,warm air will blow out after a short period of time due to
5Press ON/OFF button
Unit stops running, and when entering this mode for the next time, it will show the previous setting.
13