Operation
Timer on-off function
Remote controller operation TIMER ON-OFF
(1) After unit start, select your desired operation mode.
Operation mode will be displayed on LCD.
(2) TIMER mode selection
Press TIMER button to change TIMER mode.
Every time the button is pressed, display changes as follows:
Remote |
|
| ON |
|
| OFF |
|
| ON |
| OFF |
| BLANK |
|
| AM 12:00 | PM 12:00 | AM 12:00 | PM 12:00 |
|
| ||||||||
controller |
| TIMER ON | TIMER OFF |
| TIMER |
|
| |||||||
|
|
|
|
| ||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Select your desired TIMER mide (TIMER ON or TIMEROFF) ON or OFF will flash.
(3)Timer setting for TIMER ON Press HOUR button.
Every time the button is pressed, time increases 1 min. If button is kept pressed, time will change quickly.
Every time the button is pressed, time decreases 1 min. If button is kept pressed, time will change quickly.
Time will be shown on LCD.
It can be adjusted within 24 hours.
AM refers to morning and PM to afternoon.
(4)Time confirming for TIMER ON
After time setting, press TIMER button to confirm," ON " stops blinking, while " OFF " starts blinking.
(5)Time setting for TIMER OFF
Follow the same procedure in "Time setting for TIMER ON".
(6)Time confirming for TIMER OFF
After time setting, press SET button to confirm, " OFF " stops flashing. Time displayed: Unit start or stop at x hour x min
To cancel TIMER mode
A
|
| TEMP |
|
|
| ON |
|
HEALTH |
| OFF | FAN |
|
| 1 |
|
MODE | HEALTH AIRFLOW | ||
SLEEP |
| FRESH | SWING |
CLOCK |
|
| SET |
TIMER |
| 3 | STERILIZE6 |
2 | 4 | 5 |
|
|
|
| |
RESET | CODE LIGHT | LOCK | |
Just press TIMER button several times until TIMER mode disappears.
According to the Time setting sequence of TIMER ON or TIMER OFF,either
17