Editing Recorded MDs
Moving Recorded Tracks (Move Function)
Use the Move Function to change the order of any track. After you move a track, the track numbers between the new and old track positions are automatically renumbered.
Example: Moving track C to track position 2
Track | 1 | 2 | 3 | 4 | |
number |
|
|
|
| |
A | B | C | D | ||
| |||||
|
|
|
|
|
Track C moves to
Moving |
|
| track position 2 | ||||
1 | 2 |
| |||||
| 3 | 4 |
|
|
| ||
A | C |
| B |
| D |
|
|
| - AMS ± EDIT/NO | YES | |||||
| ¤ | 0 ) | Ḡ| p r |
|
|
|
|
|
|
|
| • | • |
|
|
|
|
|
| • | • |
|
|
|
|
|
| • | • | • |
|
|
|
|
| • |
| • |
|
|
|
|
| • |
| • |
|
|
|
|
| • |
| • |
|
|
|
|
| • |
| • |
1Turn AMS until the track number you want to move appears in the display.
2Press EDIT/NO repeatedly until “Move ?” appears in the display.
3Press YES.
The track number to be moved and the new track position appears.
Track number | New track |
to be moved | position |
4Turn AMS until the new track position appears.
Labeling Recordings
(Title Function)
You can create titles for your recorded MDs and tracks. Titles — which may consist of uppercase and lowercase letters, numbers and symbols for a maximum of about 1,700 characters per disc — appear in the display during MD operation.
DISPLAY/CHAR - AMS ± 0/) EDIT/NO | YES | |||
¤ | 0 ) Ḡp | r |
|
|
|
|
| • • |
|
|
|
| • • |
|
|
| • | • | • |
|
| • |
| • |
|
| • |
| • |
|
| • |
| • |
|
| • |
| • |
Use the following procedure to label a track or an MD.
You can label a track while it is playing, pausing or recording. If the track is playing or recording, be sure to finish labeling before the track ends. If the track ends before you’ve completed the labeling procedure, the characters already entered are not recorded and the track will remain unlabeled.
1Press EDIT/NO repeatedly until “Name in ?” appears in the display, then do the following:
To label | Make sure that the deck is |
|
|
A track | Playing, pausing, recording the track |
| to be labeled, or stopped after |
| locating the track to be labeled |
|
|
An MD | Stopped with no track number |
| appearing in the display |
|
|
2Press YES.
A flashing cursor appears in the display.
5Press YES or AMS.
After you have moved the track, “Complete” appears for a few seconds and the moved track begins playing back if the deck is in playback mode.
To cancel the Move Function
Press EDIT/NO or p.
24