Sony MDS-S37 To select, Until, If you entered the wrong character, To erase a character

Page 25

3Press DISPLAY/CHAR to select the character type as follows:

To select		Press DISPLAY/CHAR repeatedly
		until

Uppercase letters		“A” appears in the display

Lowercase letters		“a” appears in the display

Numbers		“0” appears in the display

4Turn AMS to select the character.

The selected character flashes.

Letters, numbers, and symbols appear in sequential order as you turn AMS.

You can use the following symbols in titles:

!” # $ % & ’ ( ) * + , – . / : ; < = > ? @ _ `

You can press DISPLAY/CHAR to change the character type at any time during Step 4 (see Step 3).

5Press AMS to enter the selected character. The cursor shifts rightward and waits for the input of the next character.

Editing Recorded MDs

6Repeat Steps 3 to 5 until you have entered the entire title.

If you entered the wrong character

Press 0 or ) until the character to be corrected starts flashing, and repeat Steps 3 to 5 to enter the correct character.

To erase a character

Press 0 or ) until the character to be erased starts flashing, then press EDIT/NO.

To enter a space

Press AMS or ) while the cursor is flashing.

7Press YES.

This completes the labeling procedure and the title appears on the left side of the display.

To cancel labeling

Press p.

Note

You cannot label a track or an MD while you are recording over an existing track.

(Continued)

25

Image 25

Contents MiniDisc Deck Precautions About This Manual WelcomeHooking Up the System UnpackingInserting batteries into the remote OverviewConnecting the deck to an amplifier Connecting the AC power cordHookups To record through Set Input to To record Set REC Mode toPress When TOC flashes in the displayDo the following Playing an MDChecking the remaining recordable time on the MD Useful Tips for RecordingIf Auto Cut appears in the display Auto Cut Monitoring the input signal Input MonitorIf Smart Space appears in the display Smart Space Playing back tracks just recordedRecording Over Existing Tracks Adjusting the Recording LevelWhile Track flashes in the display To record from the middle of the trackMarking Track Numbers While Recording Track Marking To cancel Automatic Track MarkingTo stop Music Synchro-Recording To stop Time Machine RecordingIf the CD player does not start playing Synchro-Recording With a Sony CD PlayerTo pause recording You can change CDs during synchro-recordingChecking remaining time and the title of a track Using the DisplayLocating a Specific Track Playing Tracks Repeatedly Locating a Particular Point in a TrackRepeating the current track Repeating a specific portion A-B Repeat Playing in Random Order Shuffle PlayChecking the track order Creating Your Own Program Program PlayChanging the track order Erasing Recordings Erase Function Pausing after each track Auto PauseInserting blank spaces while recording to tape Auto Space Erasing a single track To cancel the Erase FunctionErasing all tracks on an MD Erasing a part of a track You can undo a track division To cancel the Divide Function You can divide a track while recording You can undo a track combination To cancel the Combine FunctionLabeling Recordings Title Function To cancel the Move FunctionTo label Make sure that the deck is To select To cancel labelingUntil If you entered the wrong characterTo select Press Labeling tracks and MDs with the remoteChanging an existing title Z Undoing the Last Edit Undo FunctionErasing all titles on a disc Name Erase Function System Limitations Display MessagesMessage Meaning Some tracks cannot be combined with othersTroubleshooting Optional accessories SpecificationsInputs OutputsOperation Beep sound Beep Output During OperationsGuide to the Serial Copy Management System Turntable Tuner W, X, Y, Z IndexNames of controls Additional InformationIndex