NETWORK Menu
This projector provides the NETWORK function. If you use this function, please set up the projector according to the Network environment in which you use it.
memo When you use a Network suitable to the DHCP function, the following operation is not required commonly, because the TURN
ON is selected to the item “DHCP” at the shipment time. Please see the section “Network
Setting Up”.
Item | Description |
|
|
SETUP | Pressing the X (or the ENTER) button calls |
| the IP ADDRESS menu. |
| memo This item performs only when the TURN |
| OFF is set to the item “DHCP” of this |
| NETWORK menu. |
| The IP Address is identification number of the projector on the |
| Network. |
| 1. Set the IP Address using the S/T buttons. |
| memo The same number as the IP Address of other units cannot be |
| used. |
| Pressing the X (or the ENTER) button at the |
| IP ADDRESS menu calls the SUBNET |
| MASK menu. The SUBNET MASK is an |
| address of the Network. |
| 2. Set the same number as the address of |
| the Network to be used. |
| Pressing the X (or the ENTER) button at the |
| SUBNET MASK menu calls the DEFAULT |
| GATEWAY menu. The DEFAULT GATEWAY |
| is the address of the main device. |
| 3. Set the same number as the address of |
| the device as gateway to an outer Network. |
|
|
DHCP | Select the TURN ON or the TURN OFF using the S/T |
| buttons. : |
| TURN ON Ù TURN OFF |
| When you use a Network unsuitable to the DHCP |
| function, select the TURN OFF. |
INFORMATION | Pressing the X (or the ENTER) button |
| displays the INFORMATION menu. |
| The INFORMATION menu shows the |
| information about the current Network setting |
| as illustrated below. |
|
|
RESET | Select the EXECUTE using the S button to reset the NETWORK |
| menu items. : |
| EXECUTE Õ CANCEL |
| The items of the NETWORK menu are collectively returned to the |
| initial setting. |
|
|
ViewSonic PJ1165 | 35 |
